- September 16: Ford Mustangs Recalled Over Fractured Rear Suspension Knuckles recalls | 3 days ago
- September 7: Ford Issues Transit Steering Column Intermediate Shaft Recall recalls | 12 days ago
- September 7: Dimple Patel, 23, Charged in Fatal Ford BlueCruise Crash news | 12 days ago
- September 1: Ford Nano EcoBoost Engine Recall: Intake Valves Break recalls | 18 days ago
- August 23: Ford Bronco Sport and Maverick 12V Battery Investigation Closed investigations | 27 days ago
Ford TSB #SSM 48106
2015 Ford Fusion
TSB Document:
Affected Component: ENGINE AND ENGINE COOLING
- Summary
- Some 2014-2019 Fusion and 2017-2019 Escape vehicles with 1.5L Ecoboost engine exhibiting coolant consumption and white smoke from the exhaust. Follow Cooling System Pressure Test procedure in WSM, Section 303-03, and pressurize system to 138kPa(20 psi) and hold for 5 hours. If system pressure drops 27.57kPa (4psi) after 5 hours and borescope inspection through spark plug holes confirms coolant intrusion into the cylinders, short block replacement is required. Further teardown inspection is not required. Reuse the original cylinder head for the repair. Ford has found all returned 1.5L cylinder heads pass inspection and replacement was not required. Follow WSM, Section 303-01A procedures for repairs and refer the parts catalog as needed. Short block availability may be limited and temporary backorders will be filled as quickly as possible.
Click a tab for more information.