If you find CarComplaints.com is helpful ... We rely completely on word of mouth. Talk about us on Facebook, Twitter, tell your mother-in-law. Help us help more people.

Recall List for the 2004 Chrysler Sebring

Official recall notices have been issued for the 2004 Chrysler Sebring by the NHTSA. The complete details of all recalls are listed below, along with what they cover and the recommended solutions. It's important to note that most recalls won't cost you anything to get fixed, so if your car is affected you should call an authorized Chrysler service shop immediately!

  1. 2004 Chrysler Sebring SUSPENSION:FRONT:CONTROL ARM:LOWER ARM, SUSPENSION:FRONT:CONTROL ARM:LOWER ARM NHTSA Campaign #10E059000

    • Date Announced: DECEMBER 27, 2010
    • Vehicles Affected: 22,689

    Summary: Federal-mogul is recalling certain replacement control arm assemblies, part numbers K7425, 10945, fa4510X, K7427, 10946, and fa4611X, sold for use on various passenger vehicles listed above. The ball joint on the control arm assembly can fail causing the ball stud to wear through the control arm housing resulting in noise and/or separation of the ball stud from the housing.

    Consequence: If there is a separation of the ball stud from the housing, the driver can loose steering control, possibly resulting in a vehicle crash.

    Actions: Federal-mogul will notify owners of record and replace the affected control arms free of charge. The safety recall began on January 28, 2011. Owners may contact federal-mogul at 1-877-489-6659. For detailed information & supporting documents, see the official NHTSA page concerning recall #10E059000 »

  2. 2004 Chrysler Sebring SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT NHTSA Campaign #09E056000

    • Date Announced: OCTOBER 09, 2009
    • Vehicles Affected: 5,787

    Summary: Qualis automotive is recalling certain aftermarket ball joints sold for use on certain passenger vehicles. The socket may have been excessively hardened which could cause it to crack near the retaining ring groove allowing the ball stud to separate under impact load. The subject ball joints were sold as four part numbers, D10945, D10946, G10945, and G10946. The affected control arms, D10945 and D10946, are stamped with the following dates on the ball joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, and 116609. The G10945 and G10946 are the same part as the D10945 and D10946 respectively. They are labeled differently depending on the aftermarket customer.

    Consequence: Separation of the ball stud from the socket of the ball joint housing would allow the control arm to collapse and the wheel to fold in causing loss of steering control, possibly resulting in a crash.

    Actions: Qualis automotive will replace the ball joints free of charge. The safety recall began on November 9, 2009. Owners may contact qualis automotive at 1-800-493-4128. For detailed information & supporting documents, see the official NHTSA page concerning recall #09E056000 »

  3. 2004 Chrysler Sebring EXTERIOR LIGHTING NHTSA Campaign #09E012000

    • Date Announced: APRIL 07, 2009
    • Vehicles Affected: 16,270

    Summary: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of Federal Motor Vehicle Safety Standard no. 108, "lamps, reflective devices, and associated equipment." These lamps do not contain the required amber side reflectors.

    Consequence: Decreased lighting visibility may result in a vehicle crash.

    Actions: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on May 11, 2009. Owners may contact sabersport at 1-909-598-7589. For detailed information & supporting documents, see the official NHTSA page concerning recall #09E012000 »

  4. 2004 Chrysler Sebring SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER, SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER NHTSA Campaign #07E023000

    • Date Announced: MARCH 29, 2007
    • Vehicles Affected: 13,128

    Summary: Certain cardone master cylinders with part numbers 10-2925, 10-2987, 10-2987mza, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, and 11-3156, and with date codes lower than dca7078 sold as replacement equipment for use on the vehicles listed above. The seal on master cylinder can fail and leak brake fluid.

    Consequence: Loss of brake fluid can result in poor braking performance, possibly resulting in a vehicle crash.

    Actions: Cardone will notify owners and offer to repurchase any defective master cylinders. The recall began during April 2007. Owners can contact cardone at 1-800-777-4780. For detailed information & supporting documents, see the official NHTSA page concerning recall #07E023000 »

  5. 2004 Chrysler Sebring SEAT BELTS:REAR NHTSA Campaign #04V336000

    • Date Announced: JULY 08, 2004
    • Vehicles Affected: 312

    Summary: On certain convertible model vehicles, the left hand rear seat belt retractor bolt may not have been properly tightened.

    Consequence: This may result in the rear seat occupant being improperly restrained in a crash.

    Actions: Dealers will tighten the left side rear seat belt retractor bolt to the proper specification. Owner notification began on July 19, 2004. Owners can contact DaimlerChrysler at 1-800-853-1403. For detailed information & supporting documents, see the official NHTSA page concerning recall #04V336000 »

  6. 2004 Chrysler Sebring FUEL SYSTEM, GASOLINE:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS NHTSA Campaign #04V313000

    • Date Announced: JUNE 29, 2004
    • Vehicles Affected: 8,108

    Summary: On certain 2-door passenger vehicles, the fuel return line hose fitting on the electric fuel pump may be improperly molded.

    Consequence: Breakage could result in a leakage of fuel and in the presence of an ignition source, it could result a fire.

    Actions: Dealers will replace the fuel pump. The recall will begin on August 9, 2004. Owners should contact DaimlerChrysler at 1-800-853-1403. For detailed information & supporting documents, see the official NHTSA page concerning recall #04V313000 »

  7. 2004 Chrysler Sebring FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP NHTSA Campaign #03V443000

    • Date Announced: NOVEMBER 04, 2003
    • Vehicles Affected: 5,911

    Summary: On certain passenger vehicles, the fuel return line hose fitting on the electric fuel pump may be restricted, causing excessive fuel pressure to build up in the fuel injection system. Excessive fuel pressure may result in a leak in the fuel return hose.

    Consequence: Fuel leakage in the presence of an ignition source could result in a fire.

    Actions: Dealers will inspect the fuel pump pressure. Those vehicles exhibiting higher than normal fuel pump pressure will receive fuel pump modifications. Owner notification began on December 15, 2003. Owners should contact DaimlerChrysler at 1-800-992-1997. For detailed information & supporting documents, see the official NHTSA page concerning recall #03V443000 »

Browse Other Sebring Years