Technical Service Bulletins (TSBs) for the 2016 Outback are official communications between Subaru & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
REPAIR PROCEDURE - This Service Procedure provides an inspection method for identification of affected vehicles and if determined necessary, additional steps for replacing the steering column assembly. Read More »
This Service Information bulletin announces a material change to the engine accessory drive / v-belt made to address customer concerns of a slipping belt (squeal or chirping) sound. Read More »
"THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES TO OPTIMIZE TRANSMISSION CONTROL MODULE (TCM) OPERATION AND ADDRESS THE FOLLOWING CUSTOMER CONCERNS: ? ENGINE RPM ?FLARE? (SHARP RPM INCREASE WHEN CVT ?DOWNSHIFTS?) WHEN USING ... Read More »
"IF YOU RECEIVE A CUSTOMER CONCERN OF A NO CRANK / NO START CONDITION DURING VERY COLD TEMPERATURES, THE IG1, IG2, ACC1, ACC2 AND/OR THE EGI MAIN RELAYS MAY BE THE ROOT CAUSE AND REQUIRE REPLACEMENT. Read More »
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH ... Read More »
This Service Information bulletin announces a design change to the internal contact portion of the oil pressure switch to increase durability Read More »
ENGINE AND ENGINE COOLING:ENGINE:GASOLINE:BELTS AND ASSOCIATED PULLEYS
This Service Information bulletin announces a material change to the engine accessory drive / v-belt made to address customer concerns of a slipping belt (squeal or chirping) sound. Read More »
This bulletin announces a change in the production procedure for the rear muffler assembly. Spot-weld locations securing the outer shell portion have been changed to improve overall rigidity. Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:MANIFOLD/HEADER/MUFFLER/TAIL PIPE
This bulletin announces a change in the production procedure for the rear muffler assembly. Spot-weld locations securing the outer shell portion have been changed to improve overall rigidity. Read More »
"THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE FUEL FILLER DOOR (SAUCER) ASSEMBLY TO ADDRESS CUSTOMER CONCERNS OF IT BEING DIFFICULT TO OPEN AND / OR CLOSE. Read More »
THIS SERVICE INFORMATION BULLETIN SERVES AS A REMINDER TO ALWAYS FOLLOW THE PROPER PROCEDURES WHEN DIAGNOSIS OF A DTC B1500 LEADS TO REPLACEMENT OF A FAULTY MAIN AND / OR SUB FUEL LEVEL SENSOR. Read More »
This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Read More »
This bulletin provides a diagnostic procedure along with Transmission Control Module (TCM) reprogramming files to address isolated customer concerns of a "bump" feeling from the CVT. Read More »
Only Models Equipped with TR690 CVT only. This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Read More »
This bulletin announces availability of reprogramming files to optimize transmission control module (TCM) operation and address the following customer concerns: ? Engine RPM ?flare? (sharp RPM increase when CVT ?downshifts?) when using ... Read More »
THIS BULLETIN PROVIDES A PROCEDURE FOR DIAGNOSING A CUSTOMER CONCERN OF A DELAYED AND / OR HARSH ENGAGEMENT OF THE CVT (MODEL TR580) WHEN SHIFTING INTO REVERSE OR DRIVE FROM NEUTRAL. Read More »
This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Read More »
Only Models Equipped with TR690 CVT only. This bulletin has been developed in response to a small number of customer concerns regarding fluid seepage found coming from the CVT assembly. Read More »
TSB: All Models Equipped with CVT Transmissions. This Service Information bulletin provides a new flow chart and additional diagnostic tools to assist Technicians with troubleshooting DTC P0841- SECONDARY OIL PRESSURE SENSOR PERFORMANCE. Read More »
SUBARU OF AMERICA, INC. HAS EXTENDED THE AVAILABILITY OF REMANUFACTURED CVT TRANSMISSIONS TO INCLUDE CROSSTREK, FORESTER AND IMPREZA APPLICATIONS. Read More »
This bulletin provides a diagnostic procedure along with Transmission Control Module (TCM) reprogramming files to address isolated customer concerns of a "bump" feeling from the CVT. Read More »
POWER TRAIN:AUTOMATIC TRANSMISSION:TORQUE CONVERTER
SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2016 MODEL YEAR SUBARU LEGACY AND OUTBACK VEHICLES TO INSPECT AND POSSIBLY TIGHTEN OR REPLACE THE BOLTS THAT ATTACH THE PROPELLER SHAFT TO THE REAR DIFFERENTIAL. Read More »
This bulletin announces the availability of reprogramming files to optimize the ECM and address the following customer concerns: * Check Engine light coming on (with DTC P05A0 stored in memory). Read More »
This bulletin announces the availability of reprogramming files to optimize the ECM and address the following customer concerns: * Check Engine light coming on (with DTC P05A0 stored in memory). Read More »
ONLY 2016-2017MY: Those Models equipped with STARLINK Telematics. Provisioning is the process by which the DCM receives the subscription request and activates the related DCM features requested as outlined in the specific subscription ... Read More »
This bulletin announces availability of a new power seat memory control module designed to address customer concerns of the seat memory feature not operating properly. Read More »
This bulletin announces availability of new rear gate (PRG) stays designed to address customer concerns of other than expected PRG operation. Read More »
TSB: Only those models equipped with Starlink Telematics. Data Communication Module (DCM) Procedures for Provisioning Failure, Inspection / Repair. Read More »
This bulletin announces availability of an enhanced audio system power amplifier which contains software to address customer concerns of voice guidance instructions (words) being cut short or cut off. Read More »
This bulletin announces availability of reprogramming files to optimize transmission control module (TCM) operation and address the following customer concerns: ? Engine RPM ?flare? (sharp RPM increase when CVT ?downshifts?) when using ... Read More »
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
This bulletin announces the availability of reprogramming files to optimize the ECM and address the following customer concerns: * Check Engine light coming on (with DTC P05A0 stored in memory). Read More »
This bulletin announces the availability of reprogramming files to optimize the ECM and address the following customer concerns: * Check Engine light coming on (with DTC P05A0 stored in memory). Read More »
THIS BULLETIN ANNOUNCES A CHANGE TO THE BATTERY SENSOR TO PREVENT UNNECESSARY OCCURRENCE OF DTC P1C00 BEING SET / STORED IN THE ECM MEMORY. Read More »
"IF YOU RECEIVE A CUSTOMER CONCERN OF A NO CRANK / NO START CONDITION DURING VERY COLD TEMPERATURES, THE IG1, IG2, ACC1, ACC2 AND/OR THE EGI MAIN RELAYS MAY BE THE ROOT CAUSE AND REQUIRE REPLACEMENT. Read More »
This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving "Gen 2" F10 Navigation and Display Audio ... Read More »
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving "Gen 2" F10 Navigation and Display Audio units with ... Read More »
Revised TSB: This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display ... Read More »
"THIS BULLETIN ANNOUNCES AVAILABILITY OF AN ENHANCED AUDIO SYSTEM POWER AMPLIFIER WHICH CONTAINS SOFTWARE TO ADDRESS CUSTOMER CONCERNS OF VOICE GUIDANCE INSTRUCTIONS (WORDS) BEING CUT SHORT OR CUT OFF. Read More »
IN AN EFFORT TO CLARIFY INFORMATION CONTAINED IN THE WINDSHIELD WARRANTY EXTENSION TSB #12‐192‐15 DATED 10/12/2015, PLEASE REVIEW THE FOLLOWING: REPAIRS COVERED UNDER THIS WARRANTY EXTENSION ARE NOT SUBJECT TO THE ... Read More »
SUBARU OF AMERICA, INC. (SOA) QUALITY ASSURANCE HAS IDENTIFIED AN INCREASE IN THE NUMBER OF CRACKED WINDSHIELDS ON SOME 2015 AND 2016MY LEGACY AND OUTBACK MODELS. Read More »
SUBARU OF AMERICA, INC. (SOA) QUALITY ASSURANCE HAS IDENTIFIED AN INCREASE IN THE NUMBER OF CRACKED WINDSHIELDS ON SOME 2015 AND 2016MY LEGACY AND OUTBACK MODELS. Read More »
SUBARU OF AMERICA, INC. WILL BE ISSUING A WARRANTY EXTENSION TO ADDRESS CRACKS OR BREAKAGE IN THE DEICER AREA OF THE WINDSHIELD ON 2015 AND EARLY PRODUCTION 2016 LEGACY AND OUTBACK MODELS EQUIPPED WITH THE ALL WEATHER PACKAGE THAT ... Read More »
THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO ADDRESS CUSTOMER CONCERNS OF A WIND RUSHING-TYPE SOUND WHICH SEEMS TO COME FROM THE FRONT DOOR GLASS SASH AREA. CUSTOMERS MAY REPORT A CONCERN WITH ONE OR BOTH FRONT DOORS. Read More »
SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. Read More »
This bulletin provides a procedure to address customer concerns of a squeaking sound originating from where the front seat belt buckle assembly attaches to the seat frame. Read More »
This bulletin provides supplemental information and an inspection point to use when diagnosing a wind rushing sound concern that persists on vehicles: * past the production change provided in TSB 12-176-14R, dated 10/28/2015 or * which ... Read More »
This bulletin provides supplemental information and an inspection point to use when diagnosing a wind rushing sound concern that persists on vehicles: * past the production change provided in TSB 12-176-14R, dated 10/28/2015 or * which ... Read More »
THIS BULLETIN PROVIDES A REPAIR PROCEDURE TO ADDRESS A WIND RUSHING AND / OR FLUTTERING-TYPE SOUND ORIGINATING FROM THE ?B? PILLAR AREA OF THE VEHICLE. Read More »
SHOULD YOU RECEIVE A CUSTOMER CONCERN OF VIBRATION OR LOOSENESS IN EITHER OF THE DOOR MIRRORS, A DESIGN CHANGE HAS BEEN MADE TO THE 3 MIRROR HEAD MOUNTING HOLES IN THE MOUNTING BASE. Read More »
"THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE FUEL FILLER DOOR (SAUCER) ASSEMBLY TO ADDRESS CUSTOMER CONCERNS OF IT BEING DIFFICULT TO OPEN AND / OR CLOSE. Read More »
THIS SERVICE INFORMATION BULLETIN PROVIDES DESIGN CHANGE INFORMATION REGARDING THE REAR GATE PANEL ASSEMBLY, THE REAR SPOILER ASSEMBLY AND THEIR INTERCHANGEABILITY. Read More »
This bulletin provides new part information and an identification procedure to address a small number of vehicles identified with a sticking secondary hood latch mechanism. Read More »
This bulletin announces a design change to the roof rail assemblies. This change has been made in response to isolated customer concerns of a visible gap between the base portion of the rail assembly and the roof panel as shown in the ... Read More »
This bulletin provides new part information and an identification procedure to address a small number of vehicles identified with a sticking secondary hood latch mechanism. Read More »
"THIS BULLETIN ANNOUNCES AVAILABILITY OF REPROGRAMMING FILES TO OPTIMIZE TRANSMISSION CONTROL MODULE (TCM) OPERATION AND ADDRESS THE FOLLOWING CUSTOMER CONCERNS: ? ENGINE RPM ?FLARE? (SHARP RPM INCREASE WHEN CVT ?DOWNSHIFTS?) WHEN USING ... Read More »
THIS BULLETIN PROVIDES INFORMATION REGARDING A RUNNING CHANGE TO THE TIRES BEING USED IN PRODUCTION ON 2013MY AND LATER OUTBACK. THE ILLUSTRATIONS BELOW ARE PROVIDED FOR REFERENCE. Read More »
THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO ADDRESS CUSTOMER CONCERNS OF LOOSE OR GAPPING ACCESSORY FRONT WHEEL ARCH MOLDING(S) (E201SAL000 MOLDING KIT). Read More »
This bulletin announces availability of a new power seat memory control module designed to address customer concerns of the seat memory feature not operating properly. Read More »
This bulletin announces availability of a new power seat memory control module designed to address customer concerns of the seat memory feature not operating properly. Read More »
All Models Listed with Seat Lifter Feature. This bulletin provides a procedure to address a customer reported cosmetic condition of surface rust appearing on the inner seat cushion frame of the front seat assemblies. Read More »
This bulletin announces availability of a new power seat memory control module designed to address customer concerns of the seat memory feature not operating properly. Read More »
This bulletin announces a design change to the USB connector inside the USB-AUX unit to address customer concerns of the USB cable becoming stuck and / or difficult to remove. Read More »
IMPORTANT NOTE: Due to the extensive revisions made to the information originally contained in this bulletin, a new bulletin, 15-205-16 has been issued. Please refer to this new bulletin for the latest information regarding this condition. Read More »
This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio ... Read More »
The purpose of this bulletin is to provide replacement key and immobilizer information along with an overview of the Subaru Lock Information web-site. Read More »
Revised TSB: This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display ... Read More »
This bulletin announces availability of an enhanced audio system power amplifier which contains software to address customer concerns of voice guidance instructions (words) being cut short or cut off. Read More »
THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE FUEL FILLER DOOR (SAUCER) ASSEMBLY TO ADDRESS CUSTOMER CONCERNS OF IT BEING DIFFICULT TO OPEN AND / OR CLOSE. Read More »
THIS SERVICE INFORMATION BULLETIN ANNOUNCES A NEW REQUIREMENT REGARDING ONE-TIME USE PARTS WHICH MUST REPLACED WHENEVER DISCONNECTING OR REPLACING THE PRG ROD. Read More »
UPDATE - SUBARU RECALL CAMPAIGN: WQV57 PROPELLER SHAFT ATTACHING BOLT TORQUE ? OWNER NOTIFICATION LETTERS WILL BE MAILED TODAY ? AFFECTED VIN LISTS WILL BE DISTRIBUTED TO THE REGIONAL OFFICES ? EMAILS WILL BE SENT TO OWNERS WITH A ... Read More »
SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2016 MODEL YEAR SUBARU LEGACY AND OUTBACK VEHICLES TO INSPECT AND POSSIBLY TIGHTEN OR REPLACE THE BOLTS THAT ATTACH THE PROPELLER SHAFT TO THE REAR DIFFERENTIAL. Read More »
THIS BULLETIN ANNOUNCES A DESIGN CHANGE TO THE FUEL FILLER DOOR (SAUCER) ASSEMBLY TO ADDRESS CUSTOMER CONCERNS OF IT BEING DIFFICULT TO OPEN AND / OR CLOSE. Read More »
SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2016 MODEL YEAR SUBARU LEGACY AND OUTBACK VEHICLES TO INSPECT AND POSSIBLY TIGHTEN OR REPLACE THE BOLTS THAT ATTACH THE PROPELLER SHAFT TO THE REAR DIFFERENTIAL. Read More »
"THIS SERVICE INFORMATION BULLETIN ANNOUNCES A DESIGN CHANGE TO THE OIL PRESSURE SWITCH ASSEMBLY. NICKEL PLATING HAS BEEN APPLIED TO THE INTERNAL SWITCH CONTACTS TO ENHANCE THEIR DURABILITY AND REDUCE THE POSSIBILITY OF POOR CONTACT WHICH ... Read More »
UPDATE ?] SUBARU RECALL CAMPAIGN: WQU?]56 PROPELLER SHAFT OWNER NOTIFICATION OWNER NOTIFICATION LETTERS WILL BE MAILED TODAY, AND EMAILS TO OWNERS WILL FOLLOW EARLY NEXT WEEK. SUBARU OF AMERICA, INC. Read More »
"ALL SHIPMENTS FOR THE WQU56 RECALL ARE COMPLETE. SOME RETAILERS HAVE PLACED ORDERS IN THE SYSTEM FOR THESE PARTS. WE WILL BE REMOVING THE HOLD AGAINST THE PROPELLER SHAFTS ON MONDAY, AUGUST 31, 2015. Read More »
RECALL CAMPAIGN: WQU-56 PROPELLER SHAFT ? PARTS SUPPLY UPDATE. PROPELLER SHAFT SHIPMENT QUANTITIES TO COVER ALL AFFECTED VEHICLES RETAILED PRIOR TO AUGUST 4TH STOP SALE WILL BE COMPLETED THIS WEEK. Read More »
"UPDATE: SUBARU RECALL CAMPAIGN: WQU-56 PROPELLER SHAFT-BULLETIN PLEASE BE ADVISED THAT THE PRODUCT CAMPAIGN BULLETIN FOR WQU-56 HAS BEEN POSTED ON STIS. Read More »
SUBJECT: NEW SUBARU RECALL CAMPAIGN: WQU?]56 PROPELLER SHAFT. SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2015 AND 2016 MODEL YEAR LEGACY AND OUTBACK VEHICLES. Read More »
This bulletin announces a design change to the USB connector inside the USB-AUX unit to address customer concerns of the USB cable becoming stuck and / or difficult to remove. Read More »
IMPORTANT NOTE: Due to the extensive revisions made to the information originally contained in this bulletin, a new bulletin, 15-205-16 has been issued. Please refer to this new bulletin for the latest information regarding this condition. Read More »
This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio ... Read More »
TSB: Only those models equipped with Starlink Telematics. Data Communication Module (DCM) Procedures for Provisioning Failure, Inspection / Repair. Read More »
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving "Gen 2" F10 Navigation and Display Audio units with ... Read More »
This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving "Gen 2" F10 Navigation and Display Audio ... Read More »
IMPORTANT NOTE: Due to the extensive revisions made to the information originally contained in this bulletin, a new bulletin, 15-205-16 has been issued. Please refer to this new bulletin for the latest information regarding this condition. Read More »
This bulletin announces new reprogramming file availability and the software installation procedure to address additional operational concerns received from the field and listed below involving ?Gen 2? F10 Navigation and Display Audio ... Read More »
This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving "Gen 2" F10 Navigation and Display Audio units with ... Read More »
Revised TSB: This bulletin announces reprogramming file availability and the software installation procedure to address a group of operational concerns received from the field listed below involving ?Gen 2? F10 Navigation and Display ... Read More »
"THIS BULLETIN ANNOUNCES AVAILABILITY OF AN ENHANCED AUDIO SYSTEM POWER AMPLIFIER WHICH CONTAINS SOFTWARE TO ADDRESS CUSTOMER CONCERNS OF VOICE GUIDANCE INSTRUCTIONS (WORDS) BEING CUT SHORT OR CUT OFF. Read More »
This bulletin announces availability of an enhanced audio system power amplifier which contains software to address customer concerns of voice guidance instructions (words) being cut short or cut off. Read More »
THIS BULLETIN PROVIDES INFORMATION TO HELP DIAGNOSE AND ADDRESS DIFFERENT CONDITIONS RELATING TO CUSTOMER CONCERNS WHICH MAY ARISE WHEN OPERATING THE NEW-GENERATION ?GEN 2? F10 AUDIO / NAVIGATION SYSTEM. Read More »
THIS BULLETIN PROVIDES INFORMATION TO HELP DIAGNOSE AND ADDRESS DIFFERENT CONDITIONS RELATING TO CUSTOMER CONCERNS WHICH MAY ARISE WHEN OPERATING THE NEW-GENERATION ?GEN 2? F10 AUDIO / NAVIGATION SYSTEM. Read More »
THIS BULLETIN PROVIDES INFORMATION TO HELP DIAGNOSE AND ADDRESS DIFFERENT CONDITIONS RELATING TO CUSTOMER CONCERNS WHICH MAY ARISE WHEN OPERATING THE NEW-GENERATION ?GEN 2? F10 AUDIO / NAVIGATION SYSTEM. Read More »
THIS BULLETIN PROVIDES INFORMATION TO HELP DIAGNOSE AND ADDRESS DIFFERENT CONDITIONS RELATING TO CUSTOMER CONCERNS WHICH MAY ARISE WHEN OPERATING THE NEW-GENERATION ?GEN 2? F10 AUDIO / NAVIGATION SYSTEM. Read More »
This bulletin announces a design change to the roof rail assemblies. This change has been made in response to isolated customer concerns of a visible gap between the base portion of the rail assembly and the roof panel as shown in the ... Read More »
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
IN AN EFFORT TO CLARIFY INFORMATION CONTAINED IN THE WINDSHIELD WARRANTY EXTENSION TSB #12‐192‐15 DATED 10/12/2015, PLEASE REVIEW THE FOLLOWING: REPAIRS COVERED UNDER THIS WARRANTY EXTENSION ARE NOT SUBJECT TO THE ... Read More »
SUBARU OF AMERICA, INC. (SOA) QUALITY ASSURANCE HAS IDENTIFIED AN INCREASE IN THE NUMBER OF CRACKED WINDSHIELDS ON SOME 2015 AND 2016MY LEGACY AND OUTBACK MODELS. Read More »
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
THE PURPOSE OF THIS BULLETIN IS TO PROVIDE A DESCRIPTION OF CURRENT CHANGES TO SERVICE MANUALS AVAILABLE VIA THE SUBARU TECHNICAL INFORMATION SYSTEM (STIS) WEB SITE. Read More »
This bulletin contains illustrations of exchange components and their manufacturer as well as a description of the proper exchange procedure. The exchange program policy can also be found in Sections 8.4.9 and 11.2. Read More »
THIS BULLETIN PROVIDES A SERVICE PROCEDURE TO ADDRESS CUSTOMER CONCERNS OF LOOSE OR GAPPING ACCESSORY FRONT WHEEL ARCH MOLDING(S) (E201SAL000 MOLDING KIT). Read More »
UPDATE - SUBARU RECALL CAMPAIGN: WQV57 PROPELLER SHAFT ATTACHING BOLT TORQUE ? OWNER NOTIFICATION LETTERS WILL BE MAILED TODAY ? AFFECTED VIN LISTS WILL BE DISTRIBUTED TO THE REGIONAL OFFICES ? EMAILS WILL BE SENT TO OWNERS WITH A ... Read More »
SUBARU OF AMERICA, INC. (SUBARU) IS RECALLING CERTAIN 2016 MODEL YEAR SUBARU LEGACY AND OUTBACK VEHICLES TO INSPECT AND POSSIBLY TIGHTEN OR REPLACE THE BOLTS THAT ATTACH THE PROPELLER SHAFT TO THE REAR DIFFERENTIAL. Read More »
"IF YOU RECEIVE A CUSTOMER CONCERN OF A NO CRANK / NO START CONDITION DURING VERY COLD TEMPERATURES, THE IG1, IG2, ACC1, ACC2 AND/OR THE EGI MAIN RELAYS MAY BE THE ROOT CAUSE AND REQUIRE REPLACEMENT. Read More »
