NHTSA Campaign #06E065000 EXTERIOR LIGHTING

JULY 17
2006

3,593 vehicles recalled

1999 DODGE DAKOTA -- Certain aj motorsport combination lamps sold as replacement lamps for use on the above listed passenger vehicles. Combination lamps not equipped with amber side reflectors fail to conform with the requirements of Federal Motor Vehicle Safety Standard no. 108, lamps, reflective devices, and associated equipment.

Lack of amber side reflectors in the lamps will decrease lighting visibility to other drivers and may possibly result in a vehicle crash.

Aj motorsport will notify owners and offer reimbursement for the lamps. The recall began on July 31, 2006. Owners may contact aj motorsport at 626-618-2026. For detailed information & supporting documents, see the official NHTSA page concerning recall #06E065000 »

NHTSA Campaign #06E026000 EXTERIOR LIGHTING

MARCH 23
2006

61,944 vehicles recalled

1999 DODGE DAKOTA -- Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to Federal Motor Vehicle Safety Standard no. 108, lamps, reflective devices, and associated equipment.

Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.

Pro-a motors will notify owners and offer to repurchase the lamps. The recall began on April 3, 2006. Owners may contact pro-a motors at 323-838-2988. For detailed information & supporting documents, see the official NHTSA page concerning recall #06E026000 »

NHTSA Campaign #06E024000 ENGINE AND ENGINE COOLING

MARCH 15
2006

44,386 vehicles recalled

1999 DODGE DAKOTA -- Certain replacement K&N fuel performance kits, P/nos. 57-1509, 57-1511, 57-1511-1, 57-1517, 57-1517-1, 57-1527, and 57-1530. Also, a small percentage of these kits were sold under the mopar performance parts brand name (P/nos. P5007069 and P5007070). All kits were manufactured from April 20, 1999, through September 23, 2004. These assemblies were manufactured as replacement equipment for certain Dodge pickup trucks and SUVS. A small piece of material from the tube wall could be sucked into the engine throttle body, which could cause the throttle to become jammed in the open position.

A jammed open throttle could cause unintended acceleration of the vehicle, possibly resulting in a crash or increased stoping distances when braking.

K&N will provide owners with a free repair kit along with repair instructions. The recall began on April 20, 2006. For detailed information & supporting documents, see the official NHTSA page concerning recall #06E024000 »

NHTSA Campaign #01V153000 AIR BAGS

MAY 08
2001

216,100 vehicles recalled

1999 DODGE DAKOTA -- Vehicle description: Pickup trucks. Sound deadener material inside the steering wheel could become detached from the cover and housing. Note: The Ram pickup trucks were built at the Warren assembly plant ("S" in the 11th VIN position) from May 16, 2000 through October 23, 2000; St. Louis North assembly plant ("J" in the 11th VIN position) from May 19, 2000 through October 23, 2000; Lago Alberto assembly plant ("M" in the 11th VIN position) from May 23, 2000 through October 23, 2000; and Saltillo assembly plant ("G" in the 11th VIN position) from May 23, 2000 through October 23, 2000. Important: Vehicles that have already had the proper clockspring installed, according to warranty records, have been excluded from this recall. In addition, 1997-2000 model year vehicles that have had a suspect replacement clockspring installed, according to warranty records, have been added to this recall.

When this occurs, the material could interfere with the clockspring ribbon and cause an open circuit. The driver air bag system will become disabled, and the air bag warning lamp will illuminate on the instrument panel.

Dealers will replace the clockspring assembly. Owner notification began June 18, 2001. Also some 1997-200 model year vehicles that, according to warranty records, have had a suspect replacement clockspring installed, will also be included in this campaign. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact DaimlerChrysler at 1-800-853-1403. For detailed information & supporting documents, see the official NHTSA page concerning recall #01V153000 »

NHTSA Campaign #01V119000 SEAT BELTS:FRONT:RETRACTOR

APRIL 11
2001

161,682 vehicles recalled

1999 DODGE DAKOTA -- Vehicle description: Certain van, wagon, pickup trucks, passenger and sport utility vehicles, fail to comply with requirements of FMVSS no. 209, "Seat Belt Assemblies." The front seat belt retractor may not comply with the requirements of the standard.

If the retractor does not work properly, it will not adequately protect occupants in the event of a crash.

Dealers will replace the seat belt retractor. Owner notification began August 20, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact DaimlerChrysler at 1-800-853-1403. For detailed information & supporting documents, see the official NHTSA page concerning recall #01V119000 »

NHTSA Campaign #00V193000 SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

JULY 17
2000

40,000 vehicles recalled

1999 DODGE DAKOTA -- Vehicle description: Pickup trucks built with 2.5L engines. Some vehicles may have been built with inadequate clearance between the left front brake tube and the power steering hose.

A puncture of the left front brake tube can result in a loss of braking force at the front wheels, increasing the risk of a crash.

Dealers will inspect the brake tube and power steering hose for wear. If wear is evident, the brake tube and/or power steering hose will be replaced. A power steering standoff bracket will be installed on all vehicles to ensure that adequate clearance between the brake tube and power steering hose is maintained. For detailed information & supporting documents, see the official NHTSA page concerning recall #00V193000 »

NHTSA Campaign #00V198000 SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS

JULY 17
2000

437,000 vehicles recalled

1999 DODGE DAKOTA -- Vehicle description: Pickup trucks. Some vehicles may have been built with inadequate clearance between the rear axle vent hose and the brake hose.

A puncture in the rear brake hose will result in a loss of braking force at the rear wheels.

Dealers will inspect the rear brake hose for evidence of wear. Worn brake hoses will be replaced. The rear vent hose will be shortened by 3 inches and a clip will be installed to assure clearance between the axle vent line and brake hose is maintained. For detailed information & supporting documents, see the official NHTSA page concerning recall #00V198000 »