TSB Document:

Affected Component: ELECTRICAL SYSTEM

Summary
Some 2019 Flex vehicles equipped with SYNC 3 without navigation may exhibit a compass that is stuck and/or does not indicate the correct direction. This may be due to the calibration in the accessory protocol interface module (APIM). To resolve the concern, reprogram the APIM using the latest level of the appropriate Ford scan tool. The SYNC 3 universal thumb drive should not be used to correct this condition. For claiming, use causal part 14G371 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

Click a tab for more information.

Date Published
AUG 11, 2020
NHTSA TSB #
10179331
Find something helpful? Spread the word.

Become a Fan & Spread the Word