Noticed during the winter and when it rained, the back windshield of my truck had condensation or water drops and run marks. Had it checked out and found that the rear light on the cab of the truck upper body area seal was not installed correctly. The seal was replaced on the light and the issue was resolved. However, they removed a body molding item, from the upper corner of the cab, a cover of some sort.. anyway, when removed, the damaged the molding putting it back on. I know this because my truck was parked out in front of my house and we got some high winds, around 35 - 50 mph.. I found the piece of molding blown off my truck and in my neighbors yard (actually my daughter saw it)... i look at it and the molding clips were all crushed as if it was forced back on incorrectly. So taking the truck in again and having this fixed too. Hopefully it will be covered under warranty since can provide proof they fixed his at the dealership and now an issue due to that repair. Go figure!