- May 9: Mercedes-Benz S580 Wheels and Tire Blowouts Cause Lawsuit news | 6 days ago
- April 8: Mercedes-Benz B-Class Engine Lawsuit Dismissed news | 37 days ago
- March 8: Mercedes-Benz 80-Amp Fuse Recall: 36,000 Vehicles recalls | 68 days ago
Mercedes-Benz TSB #LI91.10-P-076798
2022 Mercedes-Benz C300
TSB Document:
Affected Component: SEATS
- Summary
- Noise at front seats between seat-back lining and function carrier. Noise is caused by friction of the two component parts. Remove the seat-back lining (back panel) of the front seat concerned using a special tool. Via adhesive bonding, affix 2 pieces of felt at the lower seat backrest structure (see pic. 1). Via adhesive bonding, affix 2 pieces of felt in the upper area of the seat backrest at the function carrier (see pic. 2). Pic. 3 shows the function carrier from behind: Begin applying the adhesive bonding of the felt at the edge (see red arrow). Ensure that the adhesive bonding is applied in the center. Then fold the felt forward. Pic. 4 shows the function carrier from the front: Continue to apply the adhesive bonding to the forward fold. Ensure that the adhesive bonding is applied in the center.
Click a tab for more information.