- September 16: Ford Mustangs Recalled Over Fractured Rear Suspension Knuckles recalls | 3 days ago
- September 7: Ford Issues Transit Steering Column Intermediate Shaft Recall recalls | 12 days ago
- September 7: Dimple Patel, 23, Charged in Fatal Ford BlueCruise Crash news | 12 days ago
- September 1: Ford Nano EcoBoost Engine Recall: Intake Valves Break recalls | 18 days ago
- August 23: Ford Bronco Sport and Maverick 12V Battery Investigation Closed investigations | 27 days ago
Ford TSB #SSM 47204
2018 Ford Fusion
TSB Document:
Affected Component: ENGINE AND ENGINE COOLING
- Summary
- Some 2015-2018 Fusion/MKZ/MKC/Escape/Edge vehicles equipped with a 2.0L EcoBoost engine may exhibit a runs rough condition with DTCs P0300, P0301, P0302, P0303, P0304 and/or P0316. This may be due to coolant intrusion due to corrosion on the engine block. To diagnose this concern, with the engine at normal operating temperature, pressurize the cooling system to 138 kPa (20 psi) and hold for 5 hours. If the coolant pressure drops 27.57 kPa (4psi), remove the spark plugs and inspect for coolant in the cylinders. If coolant is found in any of the cylinders, replace the engine long block assembly. Follow normal prior approval process for your Dealership. However, follow the diagnostic repair procedure in this article to determine correct repair. For claiming, use causal part 6006 and applicable labor operations in Section 6 of the SLTS Manual.
Click a tab for more information.