- April 17: Ford 6F35 Transmission Recall Required, Alleges Class Action Lawsuit news | 1 days ago
- April 17: Ford Explorer Axle Bolt Recall Failed, Alleges Lawsuit news | 1 days ago
- April 16: Ford Maverick Recall Issued to Replace the Fuel Tanks recalls | 2 days ago
- April 12: Ford Fuel Injector Recall Investigated investigations | 6 days ago
- April 10: Ford Cracked Fuel Injector Recall Expanded recalls | 8 days ago
Ford TSB #SSM 47446
2018 Ford Fusion
TSB Document:
Affected Component: ENGINE AND ENGINE COOLING
- Summary
- Some Ford and Lincoln vehicles equipped with a 2.7L or 3.0L EcoBoost engine may exhibit an oil leak from the engine oil pan RTV seal. Replace the oil pan following the procedure in Workshop Manual (WSM) Section, 303-01. After removing the oil pan it is suggested to allow the crankcase to drain overnight to minimize the chance of residual oil contaminating the crankcase sealing rail. Remove all traces of old RTV and clean the engine sealing surface using only Motorcraftù Metal Brake Parts Cleaner, then wipe with Motorcraftù Metal Surface Prep Wipes and allow to air dry. Refer to WSM, Section 303-00 > RTV Sealing Surface Cleaning and Preparation. If possible, allow the new RTV sealant to cure for 4 hours before refilling the engine with oil. Skipping or improperly completing steps may result in repeat oil pan leaks.
Click a tab for more information.