- March 4: Tesla Recalls Model Y SUVs Over Loose Seatback Frame Bolts recalls | 24 days ago
- February 27: Ram 1500 and 2500 Recall Issued Over Backup Camera Failures recalls | 29 days ago
- February 26: Mercedes Exploding Sunroof Class Action Lawsuit news | 30 days ago
- February 25: eTorque Problems Cause Ram and Jeep Lawsuit news | 31 days ago
- February 24: Ram Fire Recall Involves Intake Heater Grid Relays recalls | 32 days ago
Ram TSB #9003357
2017 Ram ProMaster City
Affected Component: EQUIPMENT
- ADAPTER, Engine Oil Filter (Pentastar V6) Engineering is seeking information regarding OFA leaks. Questions/info can be directed to: Bob Jackson (248) 944-0466 - firstname.lastname@example.org Ron Dallison (248-292-9510) email@example.com Joe Lovell (734) 309-6467 - firstname.lastname@example.org If no response in 15 minutes, proceed with repair. All vehicles equipped with a 3.2L or 3.6L except for model year 2014 vehicles with leak concern: 1) Ensure the Oil Filter Adapter (OFA) Cap O-ring is seated in the proper groove in the cap and not damaged or cut. 2) If replacing the (OFA) due to a leak detected between (OFA) and block. Ensure the torque on the 5 bolts are torqued to 12nm. If not record the actual values, torque to 12nm and contact the FCA employees listed below. 3) Remove the (OFA) and replace the O-ring and gaskets only (Kit #68191356A$), NOT THE OFA. 4) If oil was drained, add oil dye to ensure the leak is repaired. For model year 2014 vehicles replace the Oil Filter Adaptor.
Click a tab for more information.