- April 19: Ford Battery Problems Cause Bronco Sport and Maverick Recall recalls | 7 days ago
- April 17: Ford 6F35 Transmission Recall Required, Alleges Class Action Lawsuit news | 9 days ago
- April 17: Ford Explorer Axle Bolt Recall Failed, Alleges Lawsuit news | 9 days ago
- April 16: Ford Maverick Recall Issued to Replace the Fuel Tanks recalls | 10 days ago
- April 12: Ford Fuel Injector Recall Investigated investigations | 14 days ago
Ford TSB #SSM 47204
2017 Ford Edge
TSB Document:
Affected Component: ENGINE AND ENGINE COOLING
- Summary
- Some 2015-2018 Fusion/MKZ/MKC/Escape/Edge vehicles equipped with a 2.0L EcoBoost engine may exhibit a runs rough condition with DTCs P0300, P0301, P0302, P0303, P0304 and/or P0316. This may be due to coolant intrusion due to corrosion on the engine block. To diagnose this concern, with the engine at normal operating temperature, pressurize the cooling system to 138 kPa (20 psi) and hold for 5 hours. If the coolant pressure drops 27.57 kPa (4psi), remove the spark plugs and inspect for coolant in the cylinders. If coolant is found in any of the cylinders, replace the engine long block assembly. Follow normal prior approval process for your Dealership. However, follow the diagnostic repair procedure in this article to determine correct repair. For claiming, use causal part 6006 and applicable labor operations in Section 6 of the SLTS Manual.
Click a tab for more information.