Is your defective Ford Bronco actually a LEMON?

Find out in 30 SECONDS or less if it qualifies for a REFUND or a CASH SETTLEMENT.

Print this page

TSB Document:

Affected Component: POWER TRAIN

Summary
Some 2021-2023 Bronco (non-Raptor) vehicles built on or before 09-Jul-2023 may exhibit a fluid leak from the front drive axle pinion seal. This may be due to operating the vehicle under high load. If leaking, replace the pinion seal following Workshop Manual (WSM) section 205-03A > Removal and Installation > Drive Pinion Flange and Seal. To prevent subsequent seal leaks, the front differential fluid must also be replaced using the revised specification Motorcraft® SAE 75W-85 Premium Synthetic Hypoid Gear Lubricant, part number XY-75W85-QL. Refer to WSM section 205-03A > General Procedures > Differential Draining and Filling. For claiming use causal part number 3254 with applicable labor operations in Section 3 of the Service Labor Time Standards (SLTS) Manual and M-Time. Reference this SSM article number in the warranty claim.

Click a tab for more information.

Date Published
FEB 21, 2024
NHTSA TSB #
10250832
Find something helpful? Spread the word.

Become a Fan & Spread the Word