- April 19: Ford Battery Problems Cause Bronco Sport and Maverick Recall recalls | 7 days ago
- April 17: Ford 6F35 Transmission Recall Required, Alleges Class Action Lawsuit news | 9 days ago
- April 17: Ford Explorer Axle Bolt Recall Failed, Alleges Lawsuit news | 9 days ago
- April 16: Ford Maverick Recall Issued to Replace the Fuel Tanks recalls | 10 days ago
- April 12: Ford Fuel Injector Recall Investigated investigations | 14 days ago
Ford TSB #SSM 47158
2018 Ford Escape
TSB Document:
Affected Component: ENGINE AND ENGINE COOLING:COOLING SYSTEM:HOSES/LINES/PIPING/FITTINGS
- Summary
- Some 2018 Escape vehicles equipped with a 1.5L EcoBoost engine may exhibit an illuminated MIL on with DTC P051B. This DTC sets when the PCM detects a sensor offset greater than a calibrated threshold just prior to engine cranking or if it detects crankcase pressure outside of the calibrated limit during low engine air flows. If DTC P051B is set with any other codes, diagnose and repair those DTCs first. If DTC P051B is the only DTC, remove and inspect the crankcase ventilation tube and sensor for ice/water. If any ice/water is found, replace the sensor and tube assembly. If no ice or water is found, follow Pin Point Test HG for the crankcase ventilation sensor and note that step HG4 should be performed KOEO only. Engineering is currently investigating. Monitor OASIS for updates.
Click a tab for more information.