- September 16: Ford Mustangs Recalled Over Fractured Rear Suspension Knuckles recalls | 3 days ago
- September 7: Ford Issues Transit Steering Column Intermediate Shaft Recall recalls | 12 days ago
- September 7: Dimple Patel, 23, Charged in Fatal Ford BlueCruise Crash news | 12 days ago
- September 1: Ford Nano EcoBoost Engine Recall: Intake Valves Break recalls | 18 days ago
- August 23: Ford Bronco Sport and Maverick 12V Battery Investigation Closed investigations | 27 days ago
Ford TSB #SSM 49583
2019 Ford F-150
TSB Document:
Affected Component: POWER TRAIN
- Summary
- Some 2019-2020 F-150 vehicles equipped with a 5.0L engine may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0011, P0012, P0021 and/or P0022 stored in the powertrain control module (PCM). The vehicle may also exhibit noise near the front of the valve covers from the intake variable camshaft timing (VCT) phasers. To resolve this condition, verify the engine oil is at the proper level. Adjust the engine oil level as necessary. If the condition persists, replace only the VCT solenoid(s) associated with the DTCs present. If the condition persists after VCT solenoid replacement, continue with normal Powertrain Controls and Emissions Diagnosis (PC/ED) Manual diagnostics and/or follow engine NVH diagnostics in Workshop Manual (WSM), Section 303-00. For claiming, use causal part 6M280 and applicable labor operations in the Service Labor Time Standards (SLTS) Manual.
Click a tab for more information.