Print this page

TSB Document:

Affected Component: POWER TRAIN

Summary
On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.

Click a tab for more information.

Date Published
MAY 10, 2019
NHTSA TSB #
10160931
Find something helpful? Spread the word.

Become a Fan & Spread the Word