- June 12: Chrysler Headrest Lawsuit Alleges Active Headrest Deployed, Injured Occupant news | 3 days ago
- June 9: Electronic Stability Control Problems Cause Dodge and Ram Recall recalls | 6 days ago
- May 23: Mazda Automatic Emergency Braking Recalls Affects CX-90 SUVs recalls | 23 days ago
- May 22: GM Duramax Diesel Lawsuit Awaiting Appeals Court Decision news | 24 days ago
- May 21: Ram ProMaster Vans Recalled Over Tail Light and Turn Signal Failures recalls | 25 days ago
Ram TSB #9004009
2020 Ram 3500
TSB Document:
Affected Component: POWER TRAIN
- Summary
- Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
Click a tab for more information.