- April 30: Honda Sudden Braking Class Action Lawsuit Says Systems Defective news | 5 days ago
- April 18: Honda Collision Mitigation Braking System Problems Investigated investigations | 17 days ago
- March 20: Ram ProMaster Vans Recalled Over Warning Lights and Chimes recalls | 46 days ago
- February 27: Audi Piston Lawsuit Settlement Reached news | 68 days ago
- February 23: Audi and VW Suction Pump Recall Involves 261,000 Vehicles recalls | 72 days ago
Audi TSB #A011452 2029340-
2012 Audi A7
TSB Document:
Affected Component: ELECTRICAL SYSTEM:SOFTWARE
- Summary
- Supersedes Technical Service Bulletin Group 01 number 13-07 dated June 21, 2013. The MIL is on. DTCs are stored in the engine control module (ECM). The faults listed above are caused by an incorrect software setting and can occur under certain driving conditions. In some scenarios, such as extended idling or heavy stop-and-go traffic, a slight misinterpretation of the data can occur and the MIL may be activated. The MIL will illuminate and DTC P112800 and/or DTC P113000 will be stored when the intake air temperature is high. Freeze frame data will show an intake air temperature above 104°F (40°C). The MIL will illuminate and DTC P008700 will be stored when the coolant temperature is high. Freeze frame data will show a coolant temperature above 212°F (100°C). There are no condition restrictions for DTC P244000 or DTC P244200.
Click a tab for more information.