- September 16: Ford Mustangs Recalled Over Fractured Rear Suspension Knuckles recalls | 3 days ago
- September 7: Ford Issues Transit Steering Column Intermediate Shaft Recall recalls | 12 days ago
- September 7: Dimple Patel, 23, Charged in Fatal Ford BlueCruise Crash news | 12 days ago
- September 1: Ford Nano EcoBoost Engine Recall: Intake Valves Break recalls | 18 days ago
- August 23: Ford Bronco Sport and Maverick 12V Battery Investigation Closed investigations | 27 days ago
Ford TSB #SSM 47379
2018 Ford Mustang
TSB Document:
Affected Component: EQUIPMENT
- Summary
- Various 2016-2018 vehicles with SYNC 3 may experience a touch screen that does not respond to any input. Using the Professional Technician Society (PTS) website > OASIS tab > SYNC version, verify the vehicle SYNC software version. If the vehicle is at version 2.2 please update the module to the latest software level. After the software is updated make sure you shut the vehicle off, open the door for 2 minutes, then turn the key back on before testing the touch screen. If the software is at a later version than 2.2, proceed with normal diagnostics in Workshop Manual (WSM), Section 415-00. For claiming, use causal part 14G371 and applicable labor operations in section 10 of the Service Labor Times Standards (SLTS) manual.
Click a tab for more information.