- April 19: Ford Battery Problems Cause Bronco Sport and Maverick Recall recalls | 3 days ago
- April 17: Ford 6F35 Transmission Recall Required, Alleges Class Action Lawsuit news | 5 days ago
- April 17: Ford Explorer Axle Bolt Recall Failed, Alleges Lawsuit news | 5 days ago
- April 16: Ford Maverick Recall Issued to Replace the Fuel Tanks recalls | 6 days ago
- April 12: Ford Fuel Injector Recall Investigated investigations | 10 days ago
Ford TSB #SSM 50089
2019 Ford Mustang
TSB Document:
Affected Component: FUEL SYSTEM, GASOLINE
- Summary
- Some 2017-2021 Ford and Lincoln vehicles equipped with 3.3L, 3.5L EcoBoost, or 5.0L engines may exhibit stalling, lack of power, low fuel rail pressure and/or DTCs P0087 or P008A after a repair was made that required the removal of the fuel line that connects the high-pressure fuel pump to the port injection rail, such as injector replacements or base engine repairs. This line must be installed in the correct orientation as it has an internal one-way check valve. To determine if the fuel line has been installed improperly, look at the position of the Oetiker clamp (stainless band clamped around the black fuel line). The clamp holds the one-way check valve in place and should be located closest to the end connected to the port injection rail. If the clamp is not closest to the port injection rail, remove and reinstall the line in the proper orientation.
Click a tab for more information.