- May 6: Hyundai Recalls 2021 Elantra For Seatback Problems recalls | 9 days ago
- April 28: Subaru Cracked Windshield Lawsuit Settlement Reached news | 17 days ago
- April 27: Mercedes Headrest Recall Needed, Alleges Lawsuit news | 18 days ago
- April 5: Jeep Sway Bar Disconnect Lawsuit Partly Dismissed news | 40 days ago
- March 23: Ram Truck Fire Recall Includes 2500, 3500, 4500, 5500 recalls | 53 days ago
Ram TSB #9003357
2012 Ram 5500
Affected Component: EQUIPMENT
- ADAPTER, Engine Oil Filter (Pentastar V6) Engineering is seeking information regarding OFA leaks. Questions/info can be directed to: Bob Jackson (248) 944-0466 - firstname.lastname@example.org Ron Dallison (248-292-9510) email@example.com Joe Lovell (734) 309-6467 - firstname.lastname@example.org If no response in 15 minutes, proceed with repair. All vehicles equipped with a 3.2L or 3.6L except for model year 2014 vehicles with leak concern: 1) Ensure the Oil Filter Adapter (OFA) Cap O-ring is seated in the proper groove in the cap and not damaged or cut. 2) If replacing the (OFA) due to a leak detected between (OFA) and block. Ensure the torque on the 5 bolts are torqued to 12nm. If not record the actual values, torque to 12nm and contact the FCA employees listed below. 3) Remove the (OFA) and replace the O-ring and gaskets only (Kit #68191356A$), NOT THE OFA. 4) If oil was drained, add oil dye to ensure the leak is repaired. For model year 2014 vehicles replace the Oil Filter Adaptor.
Click a tab for more information.