- October 18: Chevy Bolt Recall Fix Will Cost $2 Billion recalls | 9 days ago
- October 12: GM Oil Consumption Lawsuit Partly Dismissed news | 15 days ago
- October 5: Chevy Silverado and GMC Sierra 2500/3500 Owners: Park Outside recalls | 22 days ago
- September 29: GM Recalls Cadillac, Chevy and GMC Vehicles For Fuel Pumps recalls | 28 days ago
- September 21: Takata Airbag Investigation Includes 30 Million Vehicles investigations | 36 days ago
Chevrolet TSB #PIP4379L
2014 Chevrolet Silverado 2500
Affected Component: ELECTRICAL SYSTEM
- This Preliminary Information communication provides information to the technician about vehicles that have not engagement into drive, delayed, no engagement into reverse, and or a range inhibit. Technician may find Diagnostic Trouble Codes P0701, P0731, P0732, P0733, P0734, P0736, P0751, P0756, P0761, P0776, P0843, P0848, P0873, P0877, P0894 or P2723. Technician should follow published Service Information diagnostics for Diagnostic Trouble Code P0701 first. Technician will also ensure the fluid level is at the top of the hot band when the transmission fluid temperature is 175° Fahrenheit. Diagnostic Trouble Codes P0701, P0731, P0732, P0733, P0734, P0736, P0751, P0756, P0761, P0776, P0843, P0848, P0873, P0877, P0894 or P2723 can set by the following fluid service/filter change, transmission service involving removing the pan, low fluid level caused by leaks, or after long periods of storage. If the fluid level has been properly checked using the HOT check procedure listed in Service Information document 2408059 and any of the Diagnostic Trouble Codes reset during a cold start inspect the internal suction filter for possible cracks. If no other concerns are found inspect for a stuck lube regulator valve in the pump cover due to debris.
Click a tab for more information.