Technical Service Bulletins (TSBs) for the 2023 Traverse are official communications between Chevrolet & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This Preliminary information communicates that a customer may come to the dealer complaining of a whining noise from the steering system. The dealer is advised not to perform any repairs at this time. Read More »
This Preliminary information communicates that a vehicle may come to the dealer with a "Service Steering Message" and no codes set that pertain to the steering system. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This technical bulletin provides repair information to correct a customer concern of Changing Front Pedestrian Braking Alert Options Error. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels ... Read More »
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This informational bulletin advises the tech to validate if oil is leaking into the cooling system and to test and verify were to leak is coming from before replacing all the parts that wouldn't apply to the repair. Read More »
This service bulletin provides a repair procedure to correct a customer concern of Coolant and/or Oil Leak, Malfunction Indicator Lamp (MIL) Illuminateda??. Read More »
This service bulletin provides diagnostic aid information/procedures to perform inspections to determine if the engine needs to be replaced as opposed to just internal parts for knocking, rattle, squeak and/or squeal type noises from ... Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This engineering information (EI) Lite ends the need for gathering further information from technicians to use the steps in Field Product Report (FPR) App in regard to engine coolant found under vehicle. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin explains the difference in oil filters for gas engines with new oil pump control systems and the possibilities of what may happen using the incorrect filter. Read More »
The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This informational bulletin advised the technician that the engine and related parts will be debited if found that the tech didn't properly prepare the engine block from dirt and debris in bolt holes or if found that the block was damaged ... Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This engineering information (EI) Lite is requesting information from technicians to use the steps in Field Product Report (FPR) App in regard to engine coolant found under vehicle. Read More »
This service bulletin provides information for dealers/technicians on New Labor Operations for Limited Production Option (LPO) Calibrated Accessories. Read More »
This service bulletin provides information to dealership personnel on automatic transmission shift and engine driveability concerns and/or MIL ON due to aftermarket oil bath air filter use. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage. Read More »
This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This service bulletin provides diagnostic aid information/procedures to perform inspections to determine if the engine needs to be replaced as opposed to just internal parts for knocking, rattle, squeak and/or squeal type noises from ... Read More »
This service bulletin advises the tech that the rotational Clicking Noise Heard After Engine Shut Down may be normal characteristics of the vehicle. Read More »
This Preliminary information communicates that a rotational clicking noise heard after engine shut down is a design characteristic and no repairs should be attempted. Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to a fuel smell and or fuel leaking from the fuel rail pressure sensor. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This informational bulletin advises the tech to validate if oil is leaking into the cooling system and to test and verify were to leak is coming from before replacing all the parts that wouldn't apply to the repair. Read More »
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global ... Read More »
This Preliminary information communicates a concern with porosity in the cylinder head casting causing coolant to get into the oil and steps to find and repair it. Read More »
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system. Read More »
This technical bulletin advises the technician to rest the MIL and diagnose additional DTCs for why the code is setting and disabling the start/stop system. Read More »
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to a fuel smell and or fuel leaking from the fuel rail pressure sensor. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts. Read More »
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy. Read More »
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy. Read More »
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Code P2097 or P2099. Read More »
This engineering information (EI) closure ends the need for further information from technicians in regards to a fuel smell and or fuel leaking from the fuel rail pressure sensor. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to a fuel smell and or fuel leaking from the fuel rail pressure sensor. Read More »
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to a fuel smell and or fuel leaking from the fuel rail pressure sensor. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This technical bulletin provides repair information to correct a customer concern of Rear Driveline Module Audible Noise Heard Between 20-70MPH. Read More »
This service bulletin advises the tech that the rotational Clicking Noise Heard After Engine Shut Down may be normal characteristics of the vehicle. Read More »
This bulletin provides a procedure to inspect and replace the torque tube to correct a customer concern of a Ratcheting Type Noise Heard from Under the Vehicle when Disengaging All Wheel Drive (AWD). Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This technical bulletin provides repair information to correct a customer concern of Rear Driveline Module Audible Noise Heard Between 20-70MPH. Read More »
This service bulletin provides a procedure to locate a possible shaft not inserted into the differential carrier that may have popped out to correct customer concerns of Transmission Grinds When Put Into Gear, Slipping, No Movement When ... Read More »
The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin provides information to dealership personnel on automatic transmission shift and engine driveability concerns and/or MIL ON due to aftermarket oil bath air filter use. Read More »
This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. Read More »
This service bulletin provides a procedure to locate a possible shaft not inserted into the differential carrier that may have popped out to correct customer concerns of Transmission Grinds When Put into Gear, Slipping, No Movement When ... Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This service bulletin advises the tech that the rotational Clicking Noise Heard After Engine Shut Down may be normal characteristics of the vehicle. Read More »
This Preliminary information communicates possible transmission fluid leak underneath the vehicle that may be root cause as a trans not being cleaned after production. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global ... Read More »
This engineering information (EI) closure ends the need for gathering information from the field in regards to Service AWD Lamp illuminated on driver information center (DIC). Read More »
This Preliminary information communicates possible transmission fluid leak underneath the vehicle that may be root cause as a trans not being cleaned after production. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission. Read More »
This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regards to the Service AWD Lamp illuminated on the driver information center (DIC). Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes ... Read More »
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes ... Read More »
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under the Front Row Seat. Read More »
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes ... Read More »
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes ... Read More »
This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present ... Read More »
This engineering information (EI) s requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This preliminary information (PI) provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961). Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin advises the tech that the rotational Clicking Noise Heard After Engine Shut Down may be normal characteristics of the vehicle. Read More »
This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present ... Read More »
This service bulletin provides repair information to correct a customer concern of OnStar Inoperative after Importing Vehicle from Canada to the United States. Read More »
This service bulletin provides repair information to correct a customer concern of OnStar Inoperative after Importing Vehicle from Canada to the United States. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain vehicles, built beginning December 2, 2021. Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain vehicles listed, built beginning December 2, 2021. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This service bulletin provides information for dealers/technicians on New Labor Operations for Limited Production Option (LPO) Calibrated Accessories. Read More »
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them. Read More »
This warranty administration bulletin provides information for dealers/technicians on System Reset and Connector Reconnect Labor Code Numbers. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This technical bulletin provides repair information to correct a customer concern of Water Intrusion at Front Door Harness Connector X500 and/or X600. Read More »
This technical bulletin provides repair information to correct a customer concern of Changing Front Pedestrian Braking Alert Options Error. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using iPhone and Samsung Phones at Offset Positions. Read More »
This Preliminary information communicates that a customer may experience the radio display screen flickering or blacking out when moving the up/down switch on the passenger seat. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Coaxial Related Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This technical bulletin provides repair information to correct a customer concern of Auto Heated Seat Option is Not Available in Personalization. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using iPhone and Samsung Phones at Offset Positions. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This service bulletin provides diagnostic/repair information to correct a customer concern of Cellphone not Charging or USB Receptacle Inoperative. Read More »
This warranty administration bulletin provides information for dealers/technicians on System Reset and Connector Reconnect Labor Code Numbers. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This engineering information (EI) s requesting to gather information from technicians, perform the check list provided and contact the engineer listed in regards to a Service Front Camera message on the driver information center (DIC), ... Read More »
This technical bulletin advises the technician to rest the MIL and diagnose additional DTCs for why the code is setting and disabling the start/stop system. Read More »
This preliminary information (PI) provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961). Read More »
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them. Read More »
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with ... Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This engineering information (EI) closure ends the need for gathering information from technicians in regards to a Service Front Camera message on the driver information center (DIC), having the loss of the front camera features and/or ... Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain vehicles, built beginning December 2, 2021. Read More »
Customer Satisfaction Program - Due to the industry-wide semiconductor shortage, the park assist feature is not functional on certain vehicles listed, built beginning December 2, 2021. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Code P2097 or P2099. Read More »
This service bulletin provides information for dealers/technicians on New Labor Operations for Limited Production Option (LPO) Calibrated Accessories. Read More »
This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines. Read More »
Customer Satisfaction Program - Certain vehicles may have a condition in which the moonroof glass was produced without clear surface primer. Dealers are to replace the moonroof panel. Read More »
This engineering information (EI Lite) closure ends the need for requesting further information from technicians to take pictures in regard to water leaking from the sunroof area that results in a repair on any 2023 Enclave/Traverse. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This engineering information (EI Lite) closure ends the need for requesting further information from technicians to take pictures in regard to water leaking from the sunroof area that results in a repair on any 2023 Enclave/Traverse. Read More »
This engineering information (EI Lite) is requesting information from technicians to take pictures and contact the engineer listed in regards to water leaking from the sunroof area that results in a repair on any 2023 Enclave/Traverse. Read More »
Service Update: Certain vehicles may have a metal split in the passenger side rear wheelhouse inner sheet metal. Dealers are to inspect and if necessary, apply structural adhesive to new cut panel and install over split. Read More »
This technical bulletin provides a procedure to correct the condition of Creak/Tick Noise from the Left (Driver) Side Rear of the Vehicle When Traveling Over Bumps/Uneven Surfaces. Read More »
This technical bulletin provides repair information to correct a customer concern of Water Intrusion at Front Door Harness Connector X500 and/or X600. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This technical bulletin provides a procedure to correct the condition of Creak/Tick Noise from the Left (Driver) Side Rear of the Vehicle When Traveling Over Bumps/Uneven Surfaces. Read More »
This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only). Read More »
Customer Satisfaction Program. Certain vehicles listed above were manufactured and shipped to the dealer without the hood insulator. Dealers are to install the hood insulator. Read More »
This Warranty Administration bulletin provides information on the Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program. Read More »
Customer Satisfaction Program. Certain vehicles listed above were manufactured and shipped to the dealer without the hood insulator. Dealers are to inspect, and if necessary, install the hood insulator. Read More »
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks. Read More »
This bulletin updates the position of General Motors on refinishing aluminum wheels. GM has determined that wheel refinishing under warranty will no longer be performed. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement. Read More »
Service Update: Certain vehicles may have a metal split in the passenger side rear wheelhouse inner sheet metal. Dealers are to inspect and if necessary, apply structural adhesive to new cut panel and install over split. Read More »
This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel). Read More »
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement. Read More »
This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel). Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks. Read More »
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under the Front Row Seat. Read More »
This engineering information (EI) s requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This engineering information (EI) ends the need for gathering further information from technicians in regard to 3rd row release strap has fray marks and/or does not release to fold down the seat back. Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to the 3rd row release strap has fray marks and/or does not release to fold down the ... Read More »
This technical bulletin provides repair information to correct a customer concern of Auto Heated Seat Option is Not Available in Personalization. Read More »
Customer Satisfaction Program. Due to the industry-wide semiconductor shortage, the front driver and passenger seat cushion ventilation blowers are not functional on certain 2022-2023 model year vehicles listed above, built beginning ... Read More »
Due to the industry-wide semiconductor shortage, the front driver and passenger seat cushion ventilation blowers are not functional on certain 2022-2023 model year vehicles listed above, built beginning March 30, 2022. Read More »
Customer Satisfaction Program. Due to the industry-wide semiconductor shortage, the front driver and passenger seat cushion ventilation blowers are not functional on certain 2022-2023 model year vehicles listed above, built beginning ... Read More »
Customer Satisfaction Program. Due to the industry-wide semiconductor shortage, the front driver and passenger seat cushion ventilation blowers are not functional on certain 2022-2023 model year vehicles listed above, built beginning ... Read More »
This Preliminary information communicates that the personalization menu for a remote start vs push button start is not the same. On a remote start there is an option to turn of auto heated seats. Read More »
Customer Satisfaction Program. Due to the industry-wide semiconductor shortage, the front driver and passenger seat cushion ventilation blowers are not functional on certain 2022-2023 model year vehicles listed above, built beginning ... Read More »
This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp on. Technician will find Diagnostic Trouble Code P2097 or P2099. Read More »
This Preliminary information communicates to dealership technicians that if they receive a radio with the 2 stickers as noted above, the radio was remanufactured with missing components and will need to order another radio unit from the ... Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This engineering information (EI) s requesting to gather information from technicians, perform the check list provided and contact the engineer listed in regards to a Service Front Camera message on the driver information center (DIC), ... Read More »
FORWARD COLLISION AVOIDANCE: SENSING SYSTEM: CAMERA
This engineering information (EI) closure ends the need for gathering information from technicians in regards to a Service Front Camera message on the driver information center (DIC), having the loss of the front camera features and/or ... Read More »
This engineering information (EI) closure ends the need for gathering information from technicians in regards to a Service Front Camera message on the driver information center (DIC), having the loss of the front camera features and/or ... Read More »
This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. Read More »
This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Coaxial Related Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This Preliminary information communicates that a customer may come to the dealer complaining of a whining noise from the steering system. The dealer is advised not to perform any repairs at this time. Read More »
This Preliminary information communicates that a rotational clicking noise heard after engine shut down is a design characteristic and no repairs should be attempted. Read More »
This Preliminary information communicates that a customer may want to turn front pedestrian detection off but they cannot find that option in personalization. Read More »
This Preliminary information communicates that a vehicle may be encountered with a clunk or rattle from the front of the vehicle. The dealer technician is instructed to remove the cradle brace and see if the noise is gone. Read More »
This service bulletin provides repair information on release of Radio Software Version V160 Update to correct customer concerns of radio software issues. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This Preliminary information communicates that a customer may notice that the gridlines on the backup camera are very dim. They may mention that this occurred after an OTA update. The dealer technician is advised to perform no repairs. Read More »
This Preliminary information communicates to the technician that GM is aware of this concern with audio loss and the OnStar LED being red. GM is working on a solution to correct this customers concern. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This bulletin updates the position of General Motors on refinishing aluminum wheels. GM has determined that wheel refinishing under warranty will no longer be performed. Read More »
This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present ... Read More »
This engineering information (EI) s requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This technical bulletin provides repair information to correct a customer concern of hearing front brake grind/groan noise after sitting overnight. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This engineering information (EI Lite) closure ends the need for requesting further information from technicians to take pictures in regard to water leaking from the sunroof area that results in a repair on any 2023 Enclave/Traverse. Read More »
This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present ... Read More »
This service bulletin provides repair information to correct a customer concern of OnStar Inoperative after Importing Vehicle from Canada to the United States. Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This service bulletin provides repair information to correct a customer concern of OnStar Inoperative after Importing Vehicle from Canada to the United States. Read More »
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using iPhone and Samsung Phones at Offset Positions. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This service bulletin provides repair information to correct a customer concern of Rear View Camera Coaxial Related Issues - DTCs B395A, B395B, B395C, B101E, B101D. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This technical bulletin provides repair information to correct a customer concern of Auto Heated Seat Option is Not Available in Personalization. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using iPhone and Samsung Phones at Offset Positions. Read More »
This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only). Read More »
This Warranty Administration bulletin provides policy information on Causal Part requirements for transactions submitted to GM for payment. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with ... Read More »
This engineering information (EI) closure ends the need for gathering information from technicians in regards to a Service Front Camera message on the driver information center (DIC), having the loss of the front camera features and/or ... Read More »
Due to a current backorder situation and inclement weather affecting a large portion of the nation, vehicles in dealer inventory will be temporarily suspended in Investigate Vehicle History (IVH). Read More »
Customer Satisfaction Program. Certain vehicles listed above were manufactured and shipped to the dealer without the hood insulator. Dealers are to inspect, and if necessary, install the hood insulator. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This service bulletin provides diagnostic/repair information to correct a customer concern of Cellphone not Charging or USB Receptacle Inoperative. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This engineering information (EI) s requesting to gather information from technicians, perform the check list provided and contact the engineer listed in regards to a Service Front Camera message on the driver information center (DIC), ... Read More »
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with ... Read More »
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with certain ISO updates on Apple 15 phones and advises customer to update their phone to the lastest ISO update. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the latest ISO update on Apple 15 phones. Read More »
This Preliminary information communicates to the technician that GM is aware of this concern with audio loss and the OnStar LED being red. GM is working on a solution to correct this customers concern. Read More »
This service bulletin provides repair information on release of Radio Software Version V160 Update to correct customer concerns of radio software issues. Read More »
This Preliminary information communicates to the technician that GM is aware of this concern with audio loss and the OnStar LED being red. GM is working on a solution to correct this customers concern. Read More »
This Preliminary information communicates information to the technician that if they receive a vehicle with this concern after performing N212354521, General Motors is aware of this and working to correct the ECC software and will provide ... Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the lastest ISO update on Apple 15 phones. Read More »
This Preliminary information communicates that a customer may experience the radio display screen flickering or blacking out when moving the up/down switch on the passenger seat. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the lastest ISO update on Apple 15 phones. Read More »
Due to a current backorder situation and inclement weather affecting a large portion of the nation, vehicles in dealer inventory will be temporarily suspended in Investigate Vehicle History (IVH). Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the latest ISO update on Apple 15 phones. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the lastest ISO update on Apple 15 phones. Read More »
This service bulletin provides information on submitting quality Photos of Various Vehicle Concerns to the GM Technical Assistance Center (TAC). Read More »
This service bulletin provides information on All hazmat parts being returned to the Warranty Parts Center (WPC) must be shipped using Central Transport. Hazardous materials should never be sent by air transportation to the WPC. Read More »
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim. Read More »
This Warranty Administration bulletin provides information on the Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program. Read More »
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only). Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This service bulletin provides information on submitting quality Photos of Various Vehicle Concerns to the GM Technical Assistance Center (TAC). Read More »
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only). Read More »
This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only). Read More »
This warranty administration bulletin provides policy information for variable diagnostic time allowances on select labor operations (U.S. Only). Read More »
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks. Read More »
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only). Read More »
This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process. Read More »
Customer Satisfaction Program - Certain vehicles were invoiced with accessory splash guards that were not available at the time of vehicle purchase. Dealers will provide the customer with a reimbursement check in the amount of $350 USD. Read More »
This service bulletin provides information on Handling Requests for Modifications to Permanently Import/Export Vehicles Between the U.S. and Canada. Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This service bulletin provides information for dealers/technicians on New Labor Operations for Limited Production Option (LPO) Calibrated Accessories. Read More »
This technical bulletin provides repair information to correct a customer concern of Changing Front Pedestrian Braking Alert Options Error. Read More »
This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses. Read More »