- September 16: Ford Mustangs Recalled Over Fractured Rear Suspension Knuckles recalls | 3 days ago
- September 7: Ford Issues Transit Steering Column Intermediate Shaft Recall recalls | 12 days ago
- September 7: Dimple Patel, 23, Charged in Fatal Ford BlueCruise Crash news | 12 days ago
- September 1: Ford Nano EcoBoost Engine Recall: Intake Valves Break recalls | 18 days ago
- August 23: Ford Bronco Sport and Maverick 12V Battery Investigation Closed investigations | 27 days ago
Ford TSB #SSM 47849
2017 Ford Fusion
TSB Document:
Affected Component: ENGINE AND ENGINE COOLING
- Summary
- Some 2014-2019 Fusion and 2017-2019 Escape equipped with 1.5L Ecoboost engine may exhibit coolant consumption and white smoke concern. Follow the Cooling System Pressure Test procedure in WSM, Section 303-03, pressurize the cooling system to 138kPa(20 psi0 and hold for 5 hours. If cooling system pressure drops 27.57kPa(4psi) after 5 hours and internal engine coolant loss is confirmed, further investigation of the engine block surface to head gasket interface is required. Carefully inspect engine block cylinders and cylinder bore bridges for erosion, pitting, and flatness. If defects with the cylinder block surface are identified, follow WSM, Section 303-01A procedures for repairs. Complete cost cap as needed to determine the most cost effective repair. Ford has found that all returned cylinder heads pass inspection and may have been reused.
Click a tab for more information.