TSB Document:

Affected Component: EQUIPMENT

Summary
2018 PATHFINDER; MIL ON WITH DTC P34A5, AND/OR P34A9 STORED IF YOU CONFIRM MIL is ON with one or both of the following DTCs: -P34A5 (A camshaft posi actuator temp sens B1) -P34A9 (A camshaft posi actuator temp sens B2) And Outside ambient temperature was near or below freezing (32°F) when the DTCs were stored. NOTE: If any VTC DTCs other than P34A5 and/or P34A9 are also stored (example: P0011, P0021), those DTCs should be diagnosed and resolved first. ACTION Replace the electric intake valve timing control module (see Figure 1 on Page 2). -Electric intake valve timing control module is listed in the Parts Information of this bulletin. -Refer to the Electronic Service Manual (ESM), section ENGINE > ENGINE CONTROL SYSTEM, for replacement information. -Make sure to perform Electric IVT Control Actuator Position Learning after replacement of the module.

Click a tab for more information.

Date Published
FEB 27, 2018
NHTSA TSB #
10130502
Find something helpful? Spread the word.

Become a Fan & Spread the Word