- May 7: GM Transmission Lawsuit Affects Hydra-Matic 8L90 and 8L45 news | 14 days ago
- April 17: GM Shift to Park Recall Needed, Alleges Class Action Lawsuit news | 34 days ago
- March 10: GM Trucks Suffer Automatic Emergency Braking Incidents recalls | 72 days ago
- March 4: GM to Replace Engines in 2023 Colorado, Silverado 1500, GMC Sierra 1500 news | 78 days ago
- February 22: Chevy Silverado Crushed Roof Lawsuit Moves Forward news | 89 days ago
Chevrolet TSB #PIP5280
2003 Chevrolet Tahoe
TSB Document:
Affected Component: FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP
- Summary
- This Preliminary Information communication provides information to the technician about vehicles that may have a buzz noise at idle after fuel pressure regulator replacement. Technician will need to gain access to the fuel pump. After gaining access to the fuel pump check the power and ground for voltage drop with the key in the off from the fuel pump to the battery post. Technician should also check the pin fit and terminal drag. Technician may replace the fuel pump connector with the updated part using the latest version service bulletin 04-06-04-088C. Technician should inspect voltage drop points at the UBEC, fuel pump relay, ground at the frame and the battery cable grounds. If excessive resistance is found at the crimps, replace the crimp n seal splice sleeves for the affected circuits. If the circuits do not have high resistance replace the regulator using part number 19236428.
Click a tab for more information.