- February 14: Jeep Wranglers and Dodge Grand Caravans May Roll Away recalls | 3 days ago
- February 5: FCA Fights Ram and Jeep Emissions 'Defeat Device' Lawsuit news | 12 days ago
- February 4: Ram and Jeep Diesel Emissions Recall Forthcoming news | 13 days ago
- January 26: Chrysler Recalls Jeep Grand Cherokee Trackhawks For Fuel Lines recalls | 22 days ago
- January 19: Chrysler Recalls 317,000 Vehicles For Takata Airbags recalls | 29 days ago
2006 Jeep Wrangler
3 Recalls & Safety Reports
Recall List for the 2006 Jeep Wrangler
Official recalls have been issued for the 2006 Jeep Wrangler by the NHTSA. The complete details of all recalls are listed below, along with what they cover and the recommended solutions.
Recalls don't cost you anything to get fixed, but most are time-limited, so if your car is affected you should call your local Jeep service department immediately!
If you have questions about a recall, write down your VIN & then call Jeep customer service.
2006 Jeep Wrangler POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/LINKAGE NHTSA Campaign #15V222000
Summary: Chrysler (FCA US LLC) is recalling certain model year 2006 Dodge Viper and Jeep Wrangler and Liberty vehicles manufactured July 1, 2005, to July 31, 2006. In the affected vehicles, the springs within the clutch pedal position switch that prevents the vehicle from starting unless the clutch pedal is pushed down may break. As a result, the vehicle may not be started when the clutch pedal is pushed down or the engine may crank and start without the clutch pedal being pushed down causing the vehicle to unexpectedly lurch.
Consequence: If the vehicle unexpectedly moves there is an increased risk of a crash.
Actions: Chrysler will notify owners, and dealers will replace the clutch ignition interlock switch, free of charge. The recall began on August 31, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R13. For detailed information & supporting documents, see the official NHTSA page concerning recall #15V222000 »
2006 Jeep Wrangler POWER TRAIN:CLUTCH ASSEMBLY NHTSA Campaign #06V147000
Summary: On certain sport utility vehicles equipped with 6 speed manual transmissions, the hydraulic clutch master cylinder linkage rod may break. This may not allow disengagement of the clutch when the pedal is depressed.
Consequence: Unintentional vehicle movement, increased stopping distance, and engine stalling could occur which could result in a crash.
Actions: Dealers will replace the clutch master cylinder linkage rod free of charge. The recall began on August 7, 2006. Owners may contact DaimlerChrysler at 1-800-853-1403. For detailed information & supporting documents, see the official NHTSA page concerning recall #06V147000 »
2006 Jeep Wrangler POWER TRAIN:AUTOMATIC TRANSMISSION NHTSA Campaign #05V460000
Summary: On certain pickup trucks, sport utility and passenger vehicles equipped with 42rle automatic transmissions, the cup plug that retains the park pawl anchor shaft may be improperly installed. If the shaft moves out of position, the vehicle may not be able to achieve 'park' position.
Consequence: If this occurs and the parking brake is not applied, the vehicle may roll away and cause a crash without warning.
Actions: Dealers will inspect the transmissions and install a bracket to ensure the park pawl anchor shaft is retained in the proper position. The recall began on November 28, 2005. Owners may contact DaimlerChrysler at 1-800-853-1403. For detailed information & supporting documents, see the official NHTSA page concerning recall #05V460000 »
Browse Other Wrangler Years
- 2017 Jeep Wrangler
- 2016 Jeep Wrangler
- 2015 Jeep Wrangler
- 2014 Jeep Wrangler
- 2013 Jeep Wrangler
- 2012 Jeep Wrangler
- 2011 Jeep Wrangler
- 2010 Jeep Wrangler
- 2009 Jeep Wrangler
- 2008 Jeep Wrangler
- 2007 Jeep Wrangler
- 2006 Jeep Wrangler
- 2005 Jeep Wrangler
- 2004 Jeep Wrangler
- 2003 Jeep Wrangler
- 2002 Jeep Wrangler
- 2001 Jeep Wrangler
- 2000 Jeep Wrangler
- 1999 Jeep Wrangler
- 1998 Jeep Wrangler