- January 19: Chrysler Recalls 317,000 Vehicles For Takata Airbags recalls | 1 days ago
- January 16: Chrysler Says Hacking Lawsuit Should Be Tossed Out news | 4 days ago
- January 12: Chrysler Pacifica Stalling Problems Cause Recall recalls | 8 days ago
- January 8: Alfa Romeo Giulia and Stelvio Recalled Due to Brake Fluid recalls | 12 days ago
- January 8: Chrysler Uconnect Lawsuit Continues For Kansas Customers news | 12 days ago
2003 Chrysler Sebring
6 Recalls & Safety Reports
Recall List for the 2003 Chrysler Sebring
Official recalls have been issued for the 2003 Chrysler Sebring by the NHTSA. The complete details of all recalls are listed below, along with what they cover and the recommended solutions.
Recalls don't cost you anything to get fixed, but most are time-limited, so if your car is affected you should call your local Chrysler service department immediately!
If you have questions about a recall, write down your VIN & then call Chrysler customer service.
2003 Chrysler Sebring AIR BAGS:PASSENGER SIDE FRONTAL NHTSA Campaign #15V338000
Summary: Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2000-2005 Eclipse vehicles manufactured April 5, 1999, to December 17, 2004, 2001-2005 Eclipse Spyder vehicles manufactured January 19, 2000, to March 18, 2005, 2001-2005 Chrysler Sebring vehicles manufactured April 17, 2000, to February 21, 2005, and 2001-2005 Dodge Stratus vehicles manufactured April 17, 2000, to February 22, 2005. In the affected vehicles, the passenger side sun visor may be folded down in such a position that, if the passenger frontal air bag deploys, the passenger side sun visor may detach.
Consequence: If the passenger side sun visor detaches and is propelled rearward, there is an increased risk of occupant injury.
Actions: MMNA will notify their owners, and Chrysler will notify the Chrysler and Dodge owners. Dealers will install a tether strap to retain the passenger sun visor, free of charge. The recall began on July 20, 2015. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-15-005. Chrysler and Dodge owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R30. For detailed information & supporting documents, see the official NHTSA page concerning recall #15V338000 »
2003 Chrysler Sebring SUSPENSION:FRONT:CONTROL ARM:LOWER ARM, SUSPENSION:FRONT:CONTROL ARM:LOWER ARM NHTSA Campaign #10E059000
Summary: Federal-mogul is recalling certain replacement control arm assemblies, part numbers K7425, 10945, fa4510X, K7427, 10946, and fa4611X, sold for use on various passenger vehicles listed above. The ball joint on the control arm assembly can fail causing the ball stud to wear through the control arm housing resulting in noise and/or separation of the ball stud from the housing.
Consequence: If there is a separation of the ball stud from the housing, the driver can loose steering control, possibly resulting in a vehicle crash.
Actions: Federal-mogul will notify owners of record and replace the affected control arms free of charge. The safety recall began on January 28, 2011. Owners may contact federal-mogul at 1-877-489-6659. For detailed information & supporting documents, see the official NHTSA page concerning recall #10E059000 »
2003 Chrysler Sebring SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT, SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT NHTSA Campaign #09E056000
Summary: Qualis automotive is recalling certain aftermarket ball joints sold for use on certain passenger vehicles. The socket may have been excessively hardened which could cause it to crack near the retaining ring groove allowing the ball stud to separate under impact load. The subject ball joints were sold as four part numbers, D10945, D10946, G10945, and G10946. The affected control arms, D10945 and D10946, are stamped with the following dates on the ball joints: 134308, 135708, 100109, 102709, 104109, 105509, 107609, 108909, 110309, 113209, and 116609. The G10945 and G10946 are the same part as the D10945 and D10946 respectively. They are labeled differently depending on the aftermarket customer.
Consequence: Separation of the ball stud from the socket of the ball joint housing would allow the control arm to collapse and the wheel to fold in causing loss of steering control, possibly resulting in a crash.
Actions: Qualis automotive will replace the ball joints free of charge. The safety recall began on November 9, 2009. Owners may contact qualis automotive at 1-800-493-4128. For detailed information & supporting documents, see the official NHTSA page concerning recall #09E056000 »
2003 Chrysler Sebring EXTERIOR LIGHTING NHTSA Campaign #09E012000
Summary: Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of Federal Motor Vehicle Safety Standard no. 108, "lamps, reflective devices, and associated equipment." These lamps do not contain the required amber side reflectors.
Consequence: Decreased lighting visibility may result in a vehicle crash.
Actions: Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on May 11, 2009. Owners may contact sabersport at 1-909-598-7589. For detailed information & supporting documents, see the official NHTSA page concerning recall #09E012000 »
2003 Chrysler Sebring SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER, SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER NHTSA Campaign #07E023000
Summary: Certain cardone master cylinders with part numbers 10-2925, 10-2987, 10-2987mza, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, and 11-3156, and with date codes lower than dca7078 sold as replacement equipment for use on the vehicles listed above. The seal on master cylinder can fail and leak brake fluid.
Consequence: Loss of brake fluid can result in poor braking performance, possibly resulting in a vehicle crash.
Actions: Cardone will notify owners and offer to repurchase any defective master cylinders. The recall began during April 2007. Owners can contact cardone at 1-800-777-4780. For detailed information & supporting documents, see the official NHTSA page concerning recall #07E023000 »
2003 Chrysler Sebring FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP NHTSA Campaign #03V443000
Summary: On certain passenger vehicles, the fuel return line hose fitting on the electric fuel pump may be restricted, causing excessive fuel pressure to build up in the fuel injection system. Excessive fuel pressure may result in a leak in the fuel return hose.
Consequence: Fuel leakage in the presence of an ignition source could result in a fire.
Actions: Dealers will inspect the fuel pump pressure. Those vehicles exhibiting higher than normal fuel pump pressure will receive fuel pump modifications. Owner notification began on December 15, 2003. Owners should contact DaimlerChrysler at 1-800-992-1997. For detailed information & supporting documents, see the official NHTSA page concerning recall #03V443000 »
Browse Other Sebring Years
- 2010 Chrysler Sebring
- 2009 Chrysler Sebring
- 2008 Chrysler Sebring
- 2007 Chrysler Sebring
- 2006 Chrysler Sebring
- 2005 Chrysler Sebring
- 2004 Chrysler Sebring
- 2003 Chrysler Sebring
- 2002 Chrysler Sebring
- 2001 Chrysler Sebring
- 2000 Chrysler Sebring
- 1999 Chrysler Sebring