- April 19: Ford Battery Problems Cause Bronco Sport and Maverick Recall recalls | 0 days ago
- April 17: Ford 6F35 Transmission Recall Required, Alleges Class Action Lawsuit news | 2 days ago
- April 17: Ford Explorer Axle Bolt Recall Failed, Alleges Lawsuit news | 2 days ago
- April 16: Ford Maverick Recall Issued to Replace the Fuel Tanks recalls | 3 days ago
- April 12: Ford Fuel Injector Recall Investigated investigations | 7 days ago
Ford TSB #SSM 47784
2017 Ford Escape
TSB Document:
Affected Component: LANE DEPARTURE: BLIND SPOT DETECTION
- Summary
- Some 2017-2019 Escape vehicles built on or after 6-Apr-2017 equipped with factory trailer tow may exhibit a concern with a trailer lamp out warning and/or blind spot information system (BLIS) not available warning without a trailer connected to the vehicle. Access connectors C439 (4 pin) and C432 (12 pin) within the trailer connector harness (15K868). Refer to Wiring Diagram, Cell 151. Inspect connectors for corrosion and/or water contamination. Clean as required and add electrical grease (XG-12 or equivalent). Make certain the protective cover over C439 is installed and fully seated to prevent future water intrusion. For claiming, use causal part 15K868 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.
Click a tab for more information.