- April 29: Fatalities Cause Ford Mustang Mach-E BlueCruise Investigation investigations | 1 days ago
- April 29: Ford Backup Camera Class Action Lawsuits Consolidated news | 1 days ago
- April 19: Ford Battery Problems Cause Bronco Sport and Maverick Recall recalls | 11 days ago
- April 17: Ford 6F35 Transmission Recall Required, Alleges Class Action Lawsuit news | 13 days ago
- April 17: Ford Explorer Axle Bolt Recall Failed, Alleges Lawsuit news | 13 days ago
Ford TSB #SSM 50811
2022 Ford Explorer
TSB Document:
Affected Component: VISIBILITY:DEFROSTER/DEFOGGER/HVAC SYSTEM
- Summary
- Some 2020-2022 Explorer/Aviator vehicles may exhibit the A/C blowing warm air with DTCs P0645, P2CFC, and/or P2CFD present in the heating ventilation and air conditioning (HVAC) module. This may be due to spread terminal/terminal pushout in wire harness 14290 and on the corresponding pins to the body control module C (BCMC). Before replacement of the BCMC, disconnect all connectors from the BCMC and check the BCMC pins and wire terminals for damage. Refer to Workshop Manual (WSM), Section 419-10. If spread terminals or terminal pushout is present, repair as necessary. Refer to Wiring Diagram, Cell 005 for repair procedures. Reconnect all connections to the BCMC as indicated by the procedure in the WSM. Test the function of the A/C to verify that it is blowing cold air.
Click a tab for more information.