Technical Service Bulletins (TSBs) for the 2023 Malibu are official communications between Chevrolet & their dealerships that describe processes for troubleshooting or fixing certain common problems.
All vehicle manufacturers are required by U.S. law to make their TSBs available to the public.
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels ... Read More »
This service bulletin provides repair information to correct a customer concern of Service Engine Soon Illuminated in DIC and/or a Malfunctioning Fuel Gauge with DTC U0076/U18A2/P1001/P1434 or Other Message Counter Incorrect Codes Set. Read More »
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin provides a procedure to inspect and possibly repair terminals that may be damaged to correct customer concerns of Loss of Power, Malfunction Indicator Lamp (MIL) Illuminated, Gauges Inoperative and/or Multiple ... Read More »
This service bulletin explains the difference in oil filters for gas engines with new oil pump control systems and the possibilities of what may happen using the incorrect filter. Read More »
The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This informational bulletin advised the technician that the engine and related parts will be debited if found that the tech didn't properly prepare the engine block from dirt and debris in bolt holes or if found that the block was damaged ... Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin provides a service procedure to correct conditions of Poor Engine Performance in Extremely cold weather conditions, CAC Icing, MIL Illuminated with DTCs set. Read More »
This service bulletin provides information for dealers/technicians on New Labor Operations for Limited Production Option (LPO) Calibrated Accessories. Read More »
This service bulletin provides information to dealership personnel on automatic transmission shift and engine driveability concerns and/or MIL ON due to aftermarket oil bath air filter use. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This service bulletin provides information on replacing the intake manifold when the engine is replaced after severe internal engine damage. Read More »
This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set. Read More »
This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global ... Read More »
This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system. Read More »
ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy. Read More »
This service bulletin provides information on the cold start control system in DI engines to reduce cold start emissions and improve fuel economy. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This service bulletin provides repair information to correct a customer concern of Service Engine Soon Illuminated in DIC and/or a Malfunctioning Fuel Gauge with DTC U0076/U18A2/P1001/P1434 or Other Message Counter Incorrect Codes Set. Read More »
This service bulletin advises the technician to replace valve body first to determine if that is the issue for and if not, to inspect internal parts of transmission for any signs of abnormal wear to correct customer concerns of Loss of ... Read More »
This service bulletin provides service procedure information to correct a customer concern of Shift to Park Displayed on DIC When Vehicle is in- Park, No Start - DTC B000A Set. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This service bulletin advises the technician to replace valve body first to determine if that is the issue for and if not, to inspect internal parts of transmission for any signs of abnormal wear to correct customer concerns of Loss of ... Read More »
This service bulletin provides service procedure information to correct a customer concern of Shift to Park Displayed on DIC When Vehicle is in- Park, No Start - DTC B000A Set. Read More »
This technical bulletin provides a procedure to replace the shifter if the park switch has been found with bad pins, causing the customers concern. Read More »
This informational bulletin explains how to check if the pulley and/or drive chain has any damage caused by low fluid or a code set that causes the transmission to default maxing out pressure. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay. Read More »
This service bulletin provides technicians with updated information to help identify the differences between what is considered a fluid leak, and what is considered fluid seepage. Read More »
This service bulletin provides diagnostic information/procedures to aid the service technician in diagnosing 9T45/50/60 automatic transmissions with low mileage and DTCs current or history related to the control solenoids and valves. Read More »
This service bulletin provides information to dealership personnel on automatic transmission shift and engine driveability concerns and/or MIL ON due to aftermarket oil bath air filter use. Read More »
This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This Preliminary information communication provides information to the technician with diagnostic tips for diagnosing reduced or low engine power with no Driver Information Center messages, that may be caused by an inaccurate brake pedal ... Read More »
This Preliminary Information communication provides information to the technician about vehicles that may have the door locks will unlock immediately after auto locking usually at startup or while driving. Read More »
This Warranty Admin service bulletin provides guidelines for Dealers Not Required and for Dealers Required to Contact the PQC for engine or transmission assembly replacement and explains the PQC process, GWM Transaction submission, ... Read More »
This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global ... Read More »
This service bulletin provides diagnostic information/procedures to aid the service technician in diagnosing 9T45/50/60 automatic transmissions with low mileage and DTCs current or history related to the control solenoids and valves. Read More »
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes ... Read More »
This service bulletin advises the technician to replace valve body first to determine if that is the issue for and if not, to inspect internal parts of transmission for any signs of abnormal wear to correct customer concerns of Loss of ... Read More »
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes ... Read More »
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under the Front Row Seat. Read More »
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes ... Read More »
This service bulletin provides repair information to correct a customer concern of Service Engine Soon Illuminated in DIC and/or a Malfunctioning Fuel Gauge with DTC U0076/U18A2/P1001/P1434 or Other Message Counter Incorrect Codes Set. Read More »
This service bulletin provides service procedure information to correct a customer concern of Shift to Park Displayed on DIC When Vehicle is in- Park, No Start - DTC B000A Set. Read More »
This service bulletin provides repair information to correct a customer concern of the rearview driver information camera intermittent in low light conditions - replace camera. Read More »
This Preliminary information communicates a vehicle may come to the dealer with a complaint of no start, stalling, rough idle, no acceleration, loss of power, erratic shifting, fuel gauge inoperative, MIL illuminated with various codes ... Read More »
This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present ... Read More »
This engineering information (EI) s requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This preliminary information (PI) provides information om Service Programming System (SPS) Error Codes (E4398, E4399, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491 or E6961). Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This service bulletin provides service procedure information to correct a customer concern of Shift to Park Displayed on DIC When Vehicle is in- Park, No Start - DTC B000A Set. Read More »
This technical bulletin provides a procedure to replace the shifter if the park switch has been found with bad pins, causing the customers concern. Read More »
This service bulletin provides repair information to correct a customer concern of the rearview driver information camera intermittent in low light conditions - replace camera. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin provides repair information to correct a customer concern of No Crank, No Start, Quick Start/Stall, No FOB Detected, Key FOBs Inoperative, B3924 00, B3925 00, B3926 00, B3927 00, B3928 00 Set. Read More »
This technical bulletin provides repair information to correct a customer concern of Vehicle Will Not Lock and Unlock (Loss of Active Functions) Crank or Start (Loss of Passive Functions) with DTC P0513 Set. Read More »
This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present ... Read More »
This service bulletin provides repair information to correct a customer concern of OnStar Inoperative after Importing Vehicle from Canada to the United States. Read More »
This technical bulletin provides repair information to correct a customer concern of Vehicle Will Not Lock and Unlock (Loss of Active Functions) Crank or Start (Loss of Passive Functions) with DTC P0513 Set. Read More »
This technical bulletin provides repair information to correct a customer concern of No Crank, No Start, Quick Start/Stall, No FOB Detected, Key FOBs Inoperative, B3924 00, B3925 00, B3926 00, B3927 00, B3928 00 Set. Read More »
This service bulletin provides a procedure to inspect and possibly repair terminals that may be damaged to correct customer concerns of Loss of Power, Malfunction Indicator Lamp (MIL) Illuminated, Gauges Inoperative and/or Multiple ... Read More »
This service bulletin provides repair information to correct a customer concern of OnStar Inoperative after Importing Vehicle from Canada to the United States. Read More »
This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations. Read More »
This service bulletin provides a service procedure to correct conditions of Poor Engine Performance in Extremely cold weather conditions, CAC Icing, MIL Illuminated with DTCs set. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This service bulletin provides information for dealers/technicians on New Labor Operations for Limited Production Option (LPO) Calibrated Accessories. Read More »
The intent of this service bulletin is to identify aftermarket ALDL or DLC interface devices as potential sources for causing multiple customer concerns that do not have other diagnostic methods to identify them. Read More »
This warranty administration bulletin provides information for dealers/technicians on System Reset and Connector Reconnect Labor Code Numbers. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using iPhone and Samsung Phones at Offset Positions. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using iPhone and Samsung Phones at Offset Positions. Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This Preliminary Information communication provides information to the technician about vehicles that may have the door locks will unlock immediately after auto locking usually at startup or while driving. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
Service Update - certain vehicles may have a condition where one or more of the body control module connectors are not fully seated. Dealers are to inspect the connectors at the body control module and ensure they are all fully seated. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin provides information for U.S. dealers ONLY to refer to the Battery Maintenance Report to identify vehicles in dealer inventory that require attention. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This service bulletin provides diagnostic/repair information to correct a customer concern of Cellphone not Charging or USB Receptacle Inoperative. Read More »
This warranty administration bulletin provides information for dealers/technicians on System Reset and Connector Reconnect Labor Code Numbers. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin provides information for dealers/technicians on New Labor Operations for Limited Production Option (LPO) Calibrated Accessories. Read More »
This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines. Read More »
This Preliminary information communication provides information to the technician with diagnostic tips for diagnosing reduced or low engine power with no Driver Information Center messages, that may be caused by an inaccurate brake pedal ... Read More »
This Preliminary Information communication provides information to the technician about vehicles that may have the door locks will unlock immediately after auto locking usually at startup or while driving. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
Service Update. On certain vehicles, a structure plug may be missing on the passengera??s side of the dash panel. Dealers are to inspect, and if necessary, install the structure plug. Read More »
This preliminary informational (PI) bulletin provides information to dealership personnel which may be helpful when addressing underbody component corrosion with customers. Read More »
This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only). Read More »
This Preliminary Information communication provides information to the technician about vehicles that may have the door locks will unlock immediately after auto locking usually at startup or while driving. Read More »
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks. Read More »
This service bulletin provides a vibration analysis worksheet the technician can use in conjunction with the appropriate Vibration Analysis-Road testing procedure when diagnosing vibration concerns. Read More »
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement. Read More »
This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel). Read More »
This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement. Read More »
This service bulletin provides information for dealers/technicians on Vibration Shortly After Tires are Mounted/Preventing Vibration from Wheel Slip (Tire Sliding on Wheel). Read More »
This informational bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer. Read More »
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks. Read More »
This engineering information (EI) closure ends the need for gathering further information from technicians in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under the Front Row Seat. Read More »
This engineering information (EI) s requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This service bulletin provides information for dealers/technicians on Front Seat Adjuster Track Service Part Availability Separate from Complete Seat Cushion Frame Assembly. Read More »
This Preliminary information communicates to dealership technicians that if they receive a radio with the 2 stickers as noted above, the radio was remanufactured with missing components and will need to order another radio unit from the ... Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This Preliminary information communicates a "Forward Collision System Reduced" message displayed on the DIC when the Forward Automatic Braking has been set to the "Alert" setting. This is normal when the FAB has been set to "Alert". Read More »
This service bulletin provides repair information to correct a customer concern of the rearview driver information camera intermittent in low light conditions - replace camera. Read More »
This service bulletin provides repair information on release of Radio Software Version V160 Update to correct customer concerns of radio software issues. Read More »
This Preliminary information communicates that a customer may notice that the gridlines on the backup camera are very dim. They may mention that this occurred after an OTA update. The dealer technician is advised to perform no repairs. Read More »
This Preliminary information communicates to the technician that GM is aware of this concern with audio loss and the OnStar LED being red. GM is working on a solution to correct this customers concern. Read More »
This service bulletin provides repair information to correct a customer concern of the rearview driver information camera intermittent in low light conditions - replace camera. Read More »
This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present ... Read More »
This engineering information (EI) s requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This engineering information (EI) is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to Melted Burn Marks and/or Smoke Smell Coming from the Height Adjuster Motor Under ... Read More »
This service bulletin provides service procedure information to correct a customer concern of Shift to Park Displayed on DIC When Vehicle is in- Park, No Start - DTC B000A Set. Read More »
This service bulletin provides repair information to correct a customer concern of the rearview driver information camera intermittent in low light conditions - replace camera. Read More »
This service bulletin provides information to inform dealership personnel about Law Enforcement and Government vehicles that request to disable or enable content. Read More »
This service bulletin provides repair information to correct a customer concern of No Crank, No Start, Quick Start/Stall, No FOB Detected, Key FOBs Inoperative, B3924 00, B3925 00, B3926 00, B3927 00, B3928 00 Set. Read More »
This technical bulletin provides repair information to correct a customer concern of Vehicle Will Not Lock and Unlock (Loss of Active Functions) Crank or Start (Loss of Passive Functions) with DTC P0513 Set. Read More »
This Preliminary Information communication advises the technician to determine if the incorrect part number TCM has been installed causing DTC P30D9 to set Read More »
This service bulletin assists technicians in setting up PicoScope hardware/software to monitor CAN bus traffic (voltage patterns) to aid Technical Assistance (TAC) and Field Service Engineers (FSEs) in diagnosing electrical issues present ... Read More »
This service bulletin provides repair information to correct a customer concern of OnStar Inoperative after Importing Vehicle from Canada to the United States. Read More »
This technical bulletin provides repair information to correct a customer concern of Vehicle Will Not Lock and Unlock (Loss of Active Functions) Crank or Start (Loss of Passive Functions) with DTC P0513 Set. Read More »
This technical bulletin provides repair information to correct a customer concern of No Crank, No Start, Quick Start/Stall, No FOB Detected, Key FOBs Inoperative, B3924 00, B3925 00, B3926 00, B3927 00, B3928 00 Set. Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This service bulletin provides repair information to correct a customer concern of OnStar Inoperative after Importing Vehicle from Canada to the United States. Read More »
This service bulletin provides information for dealers/technicians on accessory all-weather floor liners and flat mats warped or misshapen. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using iPhone and Samsung Phones at Offset Positions. Read More »
This service bulletin provides information on the Transport Mode Feature, also known as Logistics mode, which is used to increase the 12V Battery stand time of the vehicle during transit and or long period of stand time at the dealerships. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using iPhone and Samsung Phones at Offset Positions. Read More »
This service bulletin provides information for the Global Warranty Management (GWM) Warranty Parts Center (WPC) Part Photo Return Process (U.S. Dealers Only). Read More »
This Preliminary information communicates to the dealer technicians that engineering is aware of this concern and are identifying the root cause and will update this PI when a remedy is available. Read More »
This Warranty Administration bulletin provides policy information on Causal Part requirements for transactions submitted to GM for payment. Read More »
This service bulletin provides repair information to correct a customer concern of Instrument Cluster DIC Displays Programming in Progress Message and Progress Bar. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This warranty administration bulletin provides policy information requirements applicable to key fob replacement under the New Vehicle Limited Warranty or under a Replacement Parts Warranty on 2017-2022 and newer model year vehicles with ... Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This service bulletin provides diagnostic/repair information to correct a customer concern of Cellphone not Charging or USB Receptacle Inoperative. Read More »
This service bulletin provides repair information to correct a customer concern of Wireless Charging Intermittent When Using Samsung Phones at Offset Positions. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with certain ISO updates on Apple 15 phones and advises customer to update their phone to the lastest ISO update. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the latest ISO update on Apple 15 phones. Read More »
This Preliminary information communicates to the technician that GM is aware of this concern with audio loss and the OnStar LED being red. GM is working on a solution to correct this customers concern. Read More »
This service bulletin provides repair information on release of Radio Software Version V160 Update to correct customer concerns of radio software issues. Read More »
This Preliminary information communicates to the technician that GM is aware of this concern with audio loss and the OnStar LED being red. GM is working on a solution to correct this customers concern. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the lastest ISO update on Apple 15 phones. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the lastest ISO update on Apple 15 phones. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the latest ISO update on Apple 15 phones. Read More »
This Preliminary information communicates an issue where the vehicles wireless charger no longer works with the lastest ISO update on Apple 15 phones. Read More »
This service bulletin provides information on submitting quality Photos of Various Vehicle Concerns to the GM Technical Assistance Center (TAC). Read More »
This service bulletin provides information on All hazmat parts being returned to the Warranty Parts Center (WPC) must be shipped using Central Transport. Hazardous materials should never be sent by air transportation to the WPC. Read More »
This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim. Read More »
This Warranty Administration bulletin provides information on the Global Warranty Management (GWM) Warranty Parts Center (WPC) Parts Return Program. Read More »
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only). Read More »
This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA). Read More »
This service bulletin provides information on submitting quality Photos of Various Vehicle Concerns to the GM Technical Assistance Center (TAC). Read More »
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only). Read More »
This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only). Read More »
This warranty administration bulletin provides policy information for variable diagnostic time allowances on select labor operations (U.S. Only). Read More »
This service bulletin provides information for accurate tire pressures that ensure the safe handling and appropriate ride characteristics of GM cars and trucks. Read More »
This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. Dealers Only). Read More »
This Warranty Administration bulletin provides retail and wholesale service personnel with the policies/procedures and the warranty transaction submission procedures that support the Personal Property Damage process. Read More »
This service bulletin provides information for dealers/technicians on New Labor Operations for Limited Production Option (LPO) Calibrated Accessories. Read More »
This Preliminary information communicates a GM part number for reflective high temperature heat or insulating tape when repairing wiring harnesses. Read More »
